[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] severe





Hi,
excuse me I was out of city.
the best solution is you read input/output pdf file that you can find it in help
because most of these warnings came from lack of information.
in this period you can download energy plus 6 from here
http://energyplus.helpserve.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=82
REZA


On Sun, Nov 14, 2010 at 11:02 PM, clélia moraes <arqclelia@xxxxxxxxxxx> wrote:
 

Hi Reza

I am still learning how to use Energyplus. When  I installing the version 6, it  appeared a screen below identifying the following message.

 

I tried to correct the severes put without success. As it could be solving this adaptation of  a 5version for the other 6version.

 

 

Program Version,EnergyPlus 5.0.0.031, 11/13/2010 2:54 PM,IDD_Version 5.0.0.031

   ** Warning ** Version: in IDF="6.0" not the same as expected="5.0.0"

   ** Warning ** GetAirflowNetworkInput: AirflowNetwork:MultiZone:Zone object, Ventilation Control Zone Temperature Setpoint Schedule Name not required, when Ventilation Control Mode is neither Temperature nor Enthalpy.

   **   ~~~   ** ..Ventilation Control Zone Temperature Setpoint Schedule Name specified = VENT

   **   ~~~   ** ..for Zone Name = "ZONA01", with Ventilation Control Mode = "CONSTANT"

   ** Warning ** GetAirflowNetworkInput: SurfaceAverageCalculation is entered for field = Wind Pressure Coefficient Type, but no roof surface is defined using an AirflowNetwork:MultiZone:Surface object.

   **   ~~~   ** Reconsider if this is your modeling intent. Simulation continues.

   ** Warning ** GetAirflowNetworkInput: SurfaceAverageCalculation is entered for field = Wind Pressure Coefficient Type.

   **   ~~~   ** The AirflowNetwork model provides wind pressure coefficients for 4 vertical exterior orientations and 1 horizontal roof.

   **   ~~~   **  There are only 2 exterior surface orientations defined  in this input file using AirflowNetwork:MultiZone:Surface objects.

   **   ~~~   ** Reconsider if this is your modeling intent. Simulation continues.

   ** Warning ** Missing Data Found on Weather Data File

   ************* Missing "Liquid Precipitation Depth", Number of items=   24

   ************* Testing Individual Branch Integrity

   ************* All Branches passed integrity testing

   ************* Testing Individual Supply Air Path Integrity

   ************* All Supply Air Paths passed integrity testing

   ************* Testing Individual Return Air Path Integrity

   ************* All Return Air Paths passed integrity testing

   ************* No node connection errors were found.

   ************* Beginning Simulation

   ** Warning ** Missing Data Found on Weather Data File





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___