For interzone surfaces (surfaces between two zones that are marked as such), you can create the surface in one zone and the program will create the surface in the 2nd zone. But it still needs both of them.
There is a tip on minimizing time to run a simulation in the Tips & Tricks document.
By and large, we have found V6 to be MUCH faster than earlier versions due to some things we have incorporated.
At 09:25 PM 11/13/2010, Vinay Devanathan wrote:
I am trying to run a simulation which is taking a considerably long time to complete. I have been taking all efforts to minimize the number of time consuming factors in the model.
In the course of that effor, I would like to ask a question.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___