Hi,
I want to generate the TABLE.HTML output file in csv format. I defined it in the VIEW RESULTS > DEFINE SET menu but nothing was generated? what should I do?
Shady Attia, LEED®AP
PhD Candidate
ARCHITECTURE ET CLIMAT
Place du Levant,1
B-1348 Louvain-la-Neuve
BELGIUM
Tél: +32(0)10.47.23.34
Fax: +32(0)10.47.21.50
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: marion.kerl.ext@xxxxxxxxxxx
Date: Mon, 22 Nov 2010 22:25:41 +0000
Subject: [EnergyPlus_Support] Connect BCVTB with EnergyPlusActuator
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
PhD Candidate
ARCHITECTURE ET CLIMAT
Place du Levant,1
B-1348 Louvain-la-Neuve
BELGIUM
Tél: +32(0)10.47.23.34
Fax: +32(0)10.47.21.50
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: marion.kerl.ext@xxxxxxxxxxx
Date: Mon, 22 Nov 2010 22:25:41 +0000
Subject: [EnergyPlus_Support] Connect BCVTB with EnergyPlusActuator
Hi,
I want to controll with Simulink an actuator in energyPlus.
The externalInterface:actuator is configured:
ExternalInterface,
PtolemyServer; !- Name of External Interface
ExternalInterface:Actuator,
DXAC_HEAT_PUMP_1_actuator, !- Name
DXAC HEAT PUMP 1, !- Actuated Component Unique Name
Unitary HVAC, !- Actuated Component Type
Sensible Load Request; !- Actuated Component Control Type
For tests, I send via simulink the fixed value 500W.
When I run the siumlation in BCVTB, I get the this error message: Actor is not ready to fire. Perhaps VectorAssembler.prefire() returned false?.....
And this is the energyPlus error file:
** Severe ** ExternalInterface: Received end of simulation flag at time = 0.25 hours.
** Warning ** ExternalInterface: Continue simulation without updated values from server at t =0.50 hours
Is it possible, that my actuator value for the pump is the reason for the error?
Which range of value should the actuator receive, like between 0 and 500W? I had a look in the energyPlus manuals, but I couldn't find anything.
Thanking you in advance.
Marion
I want to controll with Simulink an actuator in energyPlus.
The externalInterface:actuator is configured:
ExternalInterface,
PtolemyServer; !- Name of External Interface
ExternalInterface:Actuator,
DXAC_HEAT_PUMP_1_actuator, !- Name
DXAC HEAT PUMP 1, !- Actuated Component Unique Name
Unitary HVAC, !- Actuated Component Type
Sensible Load Request; !- Actuated Component Control Type
For tests, I send via simulink the fixed value 500W.
When I run the siumlation in BCVTB, I get the this error message: Actor is not ready to fire. Perhaps VectorAssembler.prefire() returned false?.....
And this is the energyPlus error file:
** Severe ** ExternalInterface: Received end of simulation flag at time = 0.25 hours.
** Warning ** ExternalInterface: Continue simulation without updated values from server at t =0.50 hours
Is it possible, that my actuator value for the pump is the reason for the error?
Which range of value should the actuator receive, like between 0 and 500W? I had a look in the energyPlus manuals, but I couldn't find anything.
Thanking you in advance.
Marion
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___