[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Vertical Ground Heat Exchanger
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] Vertical Ground Heat Exchanger
- From: "urbantomc" <urbantomc@xxxxxxxxx>
- Date: Tue, 04 Jan 2011 22:35:29 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Tue, 04 Jan 2011 15:35:37 -0700
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1294180536; bh=ksPjSeOCYamPiMCFbGECVYBVFJ4/GY7rQdyd5iAs4aE=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=mGH0jUky4A773JyiR2CKnANK52mmdQklgIlnOT7XIttBXRW8R9auRk+RxkkhXAJbSki7kHyt6CMQtGprVuEnQ6XTTw33U79+BQe9B70Cg5znXnJYmGAiYGJXSjJ4urYA
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=fq9kdTnxjUECFj7eK86XJmtSk5cm4wrgJQ00rw3fv8LjVPGgx3APH91zKIaLhg5TxB09dbO3FJDKEjd7mDqOwTvTHspem23kPlk/we2y9klZRK+qPE3x0W4pMnugur79;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
Hi everyone.
I have some questions regarding vertical ground heat exchangers.
1. Why is the mass flow in the vertical GHE different from the water
mass flow at the source side of the heat pump? Shouldn't they be the same?
2. When I've simulated vertical GHE with borehole configuration of 1×2 and
then of 4×4 (same depths) for the same building, the output parameter
'VERTICAL GROUND HEAT EXCHANGER:Ground Heat Exchanger Heat Transfer[W](Hourly)'
showed approximately the same values. Why is that so? Does that output
parameter mean the heat transfer of a single borehole?
Any help would be really appreciated.
Regards,
Urban
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/