James,
I'm not looking for an air temperature. I was searching for the actuall temperature of the shading system (blinds) mounted on some of my glazings. I'm not using any mechanical system, just natural ventilation. If you feel your answer is still correct, then i dont see what you mean. if you could please explain it a bit further i would be very gratefull. thank you
Pedro.
On 12-01-2011 14:28, James V Dirkes II, PE wrote:
Dear Pedro,
The air temperature that you want is present at a node in your air loop. Just ask for that node’s temperature to be reported!
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of pedro_peixeiro
Sent: Wednesday, January 12, 2011 7:09 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] window shade temperature output?
Hello everyone.
I went searching the I/O reference for a temperature output object for a window blind shade system, but for my surprise i didnt find one. Is there really no output for this, or am i missing something? thank you for any help you can give.
Regards,
Pedro
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___