To keep a constant temperature you can easily use the HVACTemplate:Zone:IdealLoadsAirSystem object for each zone you want, together with a HVACTemplate:Thermostast with the proper setpoint temperatures.
On 30-01-2011 14:11, ooikoonbeng2004 wrote:
Geo Mix,
Heat exchanges through walls,windows,floors,roof/ceiling is by convection and conduction, basics of heat transfer. There is an output variable Convection heat gain to air.
Glass also transmit radiation. There is a Window heat gain output variable.
You might also like to know the Inside and Outside surface temperatures
ooi
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Geo Mix <mixosgeo@...> wrote:
>
> Hi!
> I'm trying to investigate the heat exchanges through the building fabric of a
> hospital assuming it's functioning as a passive building (NO HVAC).
> how is it possible to find out assuming a stable indoor temperature of 21 C?
> Which variable do i need to output?
> Do i need to set up thermostats or HVAC?
> Thanks for the help.
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___