Consider:
· Your thermostat setpoint might be very low (so there is no need for heating)
The Building Performance Team
James V. Dirkes II, P.E., LEED AP, BEMP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of yusuf priyambodo
Sent: Wednesday, April 13, 2011 10:44 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Design heating load is zero
yes,,i have this problem too,,,but at all zone,,, please help
From: Dora Chi 纪曉君 <dochido@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Thu, April 14, 2011 9:22:28 AM
Subject: [EnergyPlus_Support] Design heating load is zero
I receive this warning for some of my zones:
** Warning ** Calculated design heating load for zone=1F19 OFFICE is zero.
** ~~~ ** Check Sizing:Zone and ZoneControl:Thermostat inputs.
I do not get the same warning for all the zones, and I cannot find the logic why certain zones get this message. Please help, thanks!
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___
=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17300)
http://www.pctools.com
=======