[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] vertex error





thank you,, i will check the drawing on Sketchup...



From: Vaibhav Jain <vaibhav.energyarchitect@xxxxxxxxx>
To: yusuf priyambodo <yusuf085225@xxxxxxxxx>; EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Thu, April 28, 2011 7:43:36 PM
Subject: Re: [EnergyPlus_Support] vertex error

 

You can post these images user group also, so that everyone can see it. 


If I am not wrong, these "extra lines" ("distortions") are in horizontal surfaces only and are absent in vertical surfaces. You have modeled it in Sketchup, where you can model horizontal surfaces of any polygonal shape, like a L shape or T shape etc. In my experience I have seen that E+ gives these "extra lines" when surfaces have more than 4 vertices. You can check the same in your model. What you can do is, divide your model's surfaces (which have more that 4 vertices) into two or more rectangles. I hope this will help you out. 

I am not very sure whether these "extra lines" will have any effect on different outputs or it is just a visualization issue. Can anyone throw some light on it.

Vaibhav



On Thu, Apr 28, 2011 at 5:22 PM, yusuf priyambodo <yusuf085225@xxxxxxxxx> wrote:
This is the images,, Vertex1 and Vertex2 are those that distort.

thank you.


From: Vaibhav Jain <vaibhav.energyarchitect@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx; yusuf085225@xxxxxxxxx
Sent: Thu, April 28, 2011 5:53:33 PM
Subject: Re: [EnergyPlus_Support] vertex error

Can you show images of those distortions?

Vaibhav


On Thu, Apr 28, 2011 at 3:21 PM, yusuf085225 <yusuf085225@xxxxxxxxx> wrote:
 

hi,,, i really confused about my problem.. i built my building with Google SketchUp + Open studio,,and there is no warning about my drawing,
when i edit the idf file with idf editor on "solar distribution" for example i use "FullExterior" and then simulate it, why the vertex drawing i look at DXF file become distracted? and when i change Solar distribution become "MinimalShadowing" the vertex become normal again?
why this happened?

Yusuf





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___





=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17390)
http://www.pctools.com
=======