[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] changing conditioned to unconditioned zone

Thanks Vaibhav
I did use the example file to create HVAC models. since i am using open studio to create my model , I have to use the file that the software generates as base file

On Wed, Apr 27, 2011 at 11:17 PM, Vaibhav Jain <vaibhav.energyarchitect@xxxxxxxxx> wrote:

If you have not started alike, its a better way to start with a reference file and work on it to make it as suitable to your building. Also you can compare your idf with the most nearly similar energyplus example file/reference file. Check the excel file in example file folder. 


On Wed, Apr 27, 2011 at 7:44 PM, Deepika <deepika.khowal@xxxxxxxxx> wrote:

I tried doing that. But then I couldn't understand the error. I will do it again n see what happens. 

On Apr 27, 2011, at 2:05 AM, Vaibhav Jain <vaibhav.energyarchitect@xxxxxxxxx> wrote:


In E+, you can remove the plenum zone from Sizing:Zone and ZoneControl:Thermostat. After that, you can follow errors/warnings (if any) to further debug your idf.


On Wed, Apr 27, 2011 at 12:40 PM, Vaibhav Jain <vaibhav.energyarchitect@xxxxxxxxx> wrote:
Which software has been used?


On Wed, Apr 27, 2011 at 3:50 AM, deepika khowal <deepika.khowal@xxxxxxxxx> wrote:

HI all

I am modeling a small office space . right now it has 2 zones including plenum as conditioned space. I want to change plenum from conditioned to unconditioned.
Can anyone suggest how to do that?


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe