[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Modelling voids





Just make it a single pane off thin glass....... no R value, light gets through,  good enough for a first cut...

JRR


On 4/30/2011 11:13 AM, Geo Mix wrote:
 
In a case of a large open plan office I would like to find out the variations of temperatures across space. In order to do that, I need to set up more zones. However, the boundaries between the zones would not be real (there is no physical walls or partitions between the zones). If I try to erase the surfaces that enclose the zone, I get a warning that less than 6 surfaces might lead to an incorrect calculation of heat balance. Is there an alternative way to simulate the lack of boundary between two zones?


From: "James V Dirkes II, PE" <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Sat, April 30, 2011 4:54:28 PM
Subject: RE: [EnergyPlus_Support] Modelling voids

 

What do you mean by a void?

 

The Building Performance Team
James V. Dirkes II, P.E., LEED AP, BEMP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Geo Mix
Sent: Saturday, April 30, 2011 8:15 AM
To: energyplus_support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Modelling voids

 

 

Hi
I'm looking for a way to model a void between two zones.
What are the options for specifying a surface as a void?
Are there any suggestions?
Thanks



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___