[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Multiple sizing days





Hi Linda,

I see that you can do this, but the output summary reports each zone peak cooling load only on the day with the higher temperature.  Running the file with SizingPeriod:WeatherFileDays objects captured what I wanted.  Please see the attached example file for reference.  The Sun room should see a peak cooling load coincident with a low sun angle while the NoSun room should see a peak load coincident with peak outdoor temperatures (or peak internal loads).

Thanks for the help,

--
Karen

On Tue, May 10, 2011 at 5:13 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
 

Should be fine.  Many do it.

To eliminate confusion you might change the actual dates.  And, of course, the names have to be different.

Your message got cut off so not sure what the problem is:


When I try to enter more than one cooling design day, the program


At 03:01 PM 5/10/2011, Karen Walkerman wrote:


Hi,

Is there any way to specify multiple cooling design days?  I would like to be able to test my building under a few different conditions:

1.  Typical peak day in mid summer
2.  Warm fall day with intense sun and low-angle sun
3.  Something in between 1 & 2

When I try to enter more than one cooling design day, the program

Thanks,

--
Karen





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\AutoSizing.idf