Hello,
I would be grateful if someone who is more experienced in using Energy+ could answer to my questions.
I have a couple of them and they are as follow:
1)Is it possible to model the airflow (air leakage) between two or more zones (rooms) through the closed doors (the leakage area is known) and penetrations (e.g. for conveyors)?
2) If so above, is it possible to take into account the leakage airflow in general extract from the zone (e.g. we provide xx m3/s to zone and extract xx+leakage m3/s airflow from zone)?
I know that I can simulate it in Contam but I would like to analysis of the HVAC system in wider context (airflow + energy usage).
Best regards
Wojtek
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___