[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] HVAC Sizng
Hello all,
When I simulate a building for Sizing Periods I have 3 outputs:
1. Chiller Eletricity (nominal capacity).
2. Cooling Coil (nominal total capacity, for each zone).
3. Zone Cooling (user design load, for each zone).
My question is: How can I know what is the building's total cooling load?
I think that the (chiller capacity) = (sum of zones cooling). But in
my table these values are different. (chiller capacity>sum of zones
cooling).
Can you help me?
PS. I have one chiller in the building!
Thanks!
--
Att,
--
Ricciano Liberali
Cel:55 51 81281500
www.petinelli.com
Petinelli Inc.
A Green Building Solutions Company
Rua General Carneiro 638, Alto da Gloria
Curitiba - PR 80060-150 BRAZIL
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/