[EnergyPlus_Support] Invalid Component Type.....

["jvd2pe" <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>]

Dear E+ forum,

I'm missing something, but cannot see it, so I'm hoping one of you can help.  Thanks in advance!

This is the error (The same error occurs for each zone and results in termination of the run before completion):

  ** Severe  ** During ZoneHVAC:EquipmentList Input, Invalid Component Type input=
   **   ~~~   ** Component name=
   **   ~~~   ** In ZoneHVAC:EquipmentList=ZONEEQLIST_01NORTH

Here are the objects which seem to be part of the problem:

ZoneHVAC:EquipmentList,
    ZoneEqlist_01North,      !- Name
    ZoneHVAC:AirDistributionUnit,  !- Zone Equipment 1 Object Type
    AirDistUnit_01North,     !- Zone Equipment 1 Name
    1,                       !- Zone Equipment 1 Cooling Sequence
    1;                       !- Zone Equipment 1 Heating or No-Load Sequence

ZoneHVAC:AirDistributionUnit,
    AirDistUnit_01North,     !- Name
    NodeIn_Zn_01North,       !- Air Distribution Unit Outlet Node Name
    AirTerminal:SingleDuct:VAV:Reheat,  !- Air Terminal Object Type
    VAV_01North;             !- Air Terminal Name

AirTerminal:SingleDuct:VAV:Reheat,
    VAV_01North,             !- Name
    SchCpct_AlwaysOn,        !- Availability Schedule Name
    NodeOut_VVDpr_01North,   !- Damper Air Outlet Node Name
    NodeOut_ZnSpltr_01North, !- Air Inlet Node Name
    Autosize,                !- Maximum Air Flow Rate {m3/s}
    Constant,                !- Zone Minimum Air Flow Input Method
    0.3,                     !- Constant Minimum Air Flow Fraction
    ,                        !- Fixed Minimum Air Flow Rate {m3/s}
    ,                        !- Minimum Air Flow Fraction Schedule Name
    Coil:Heating:Gas,        !- Reheat Coil Object Type
    RhtCoil_01North,         !- Reheat Coil Name
    Autosize,                !- Maximum Hot Water or Steam Flow Rate {m3/s}
    0,                       !- Minimum Hot Water or Steam Flow Rate {m3/s}
    NodeIn_Zn_01North,       !- Air Outlet Node Name
    0.001,                   !- Convergence Tolerance
    Reverse;                 !- Damper Heating Action





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/