[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Question AirLoop HVAC with 2 zones (air supplied in zone 1, exhausted in zone 2)

Hello,

I'm modeling an house with ERV energy recovery ventilator.
An AirLoop is supplying air to zone 1 (living room, bedrooms)

Physically, air is transfered from zone 1 to zone 2 (natural transfer due to higher pression in zone 1)

Question : How should we connect the zone 2 and return node (air used going back to the air loop, returning to ERV) ? (What to put in zone 2 equipement list)

Regards,

Franck Janin


PS : We do use a single duct uncontrolled equipement in zone 1 equipment list and this gives us the ability to connect supply nodes to zone 1
We are planning to use AFN in this project. We are 100% Outside air.






------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/