[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Inside Temperature on Year basis



Hi!
I have a quick question. I'm simulating a modelhome with some properties like volume, wall and roof construction (massive, stone wall and roof), glasssurface, windows,...
When I simulate the inside Temperature on a year basis, I notice that there is a big gap between the temperature on the begining of the year (more or less -2 degrees Celcius) and the end of the year (mor or less +6 degrees Celcius). It seems the building is warming up. Shouldn't the temperature line be fluently at the gap old-new year?
I already changed the Warming Up days to the maximum, but that doesnt change a thing. The building stays "cold" when simulating begins, and ends up "warm".

Any help? That would be fantastic :)

Greetings from Belgium.

Pieter



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/