Try a 2 yr simulation. The last line in the RunPeriod object.
RunPeriod,
RUN, !- Name
1, !- Begin Month
1, !- Begin Day of Month
12, !- End Month
31, !- End Day of Month
Sunday, !- Day of Week for Start Day
No, !- Use Weather File Holidays and Special Days
No, !- Use Weather File Daylight Saving Period
Yes, !- Apply Weekend Holiday Rule
Yes, !- Use Weather File Rain Indicators
Yes, !- Use Weather File Snow Indicators
1; !- Number of Times Runperiod to be Repeated
On 7/29/2011 8:00 AM, pietsor wrote:
Hi!
I have a quick question. I'm simulating a modelhome with some properties like volume, wall and roof construction (massive, stone wall and roof), glasssurface, windows,...
When I simulate the inside Temperature on a year basis, I notice that there is a big gap between the temperature on the begining of the year (more or less -2 degrees Celcius) and the end of the year (mor or less +6 degrees Celcius). It seems the building is warming up. Shouldn't the temperature line be fluently at the gap old-new year?
I already changed the Warming Up days to the maximum, but that doesnt change a thing. The building stays "cold" when simulating begins, and ends up "warm".
Any help? That would be fantastic :)
Greetings from Belgium.
Pieter
-- Richard A. Raustad Senior Research Engineer Florida Solar Energy Center University of Central Florida 1679 Clearlake Road Cocoa, FL 32922-5703 Phone: (321) 638-1454 Fax: (321) 638-1439 or 1010 Visit our web site at: http://www.fsec.ucf.edu UCF - From Promise to Prominence: Celebrating 40 Years
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___