Hello Group,
I'm not sure how to run both a Summer and a Winter DesignDay simulation.
If the idf specifies x2 SizingPeriods, i.e.
SizingPeriod:DesignDay, Winter, !- Design Day Name
AND
SizingPeriod:DesignDay, Summer, !- Design Day Name
BUT without a RunPeriod or RunPeriodControl object specified
What is actually getting simulated.
When I comment out the one SizingPeriod:DesignDay, the other gets simulated. It's
a) used in sizing
b) for warming up
c) simulated run
Q1) How do I best simulate both days seperately? Can I run x2 run periods (one for each design day) and will they be seperately warmed up?
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/