[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: How to run DesignDay simulations - Summer and Winter



When I comment out SizingPeriod:DesignDay, Summer Design Day, my other SizingPeriod:DesignDay, Winter Design Day (the remaining one) gets simulated. I get results for the entire day after the simulation (which starts only after sizing and a proper building warmup). I assume this amounts to "design day calculation" specified in the SimulationControl object?

SimulationControl,
   Yes, !- Do the zone sizing calculation
   Yes, !- Do the system sizing calculation
   Yes, !- Do the plant sizing calculation
   Yes, !- Do the design day calculation
   No;  !- Do the weather file calculation

The question is how do I do both of these special designday simulations?
Obviously if the one follows the other, I will get 2 days worth of results...will a building warmup take place between them also?

Like I said I'm not using runperiod objects.



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/