[EnergyPlus_Support] Re: How to run DesignDay simulations - Summer and Winter

["Jean marais" <jeannieboef@xxxxxxxxx>]

Thank you.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> not commenting out the summer one should cause both to run.  and you 
> will get simulation results for both.
> 
> Yes, warmup happens for each "environment".
> 
> At 07:56 AM 8/31/2011, Jean marais wrote:
> >When I comment out SizingPeriod:DesignDay, Summer Design Day, my 
> >other SizingPeriod:DesignDay, Winter Design Day (the remaining one) 
> >gets simulated. I get results for the entire day after the 
> >simulation (which starts only after sizing and a proper building 
> >warmup). I assume this amounts to "design day calculation" specified 
> >in the SimulationControl object?
> >
> >SimulationControl,
> >    Yes, !- Do the zone sizing calculation
> >    Yes, !- Do the system sizing calculation
> >    Yes, !- Do the plant sizing calculation
> >    Yes, !- Do the design day calculation
> >    No;  !- Do the weather file calculation
> >
> >The question is how do I do both of these special designday simulations?
> >Obviously if the one follows the other, I will get 2 days worth of 
> >results...will a building warmup take place between them also?
> >
> >Like I said I'm not using runperiod objects.
> >
> >
> >
> >------------------------------------
> >
> >Primary EnergyPlus support is found at:
> >http://energyplus.helpserve.com or send a message to 
> >energyplus-support@...
> >
> >The primary EnergyPlus web site is found at:
> >http://www.energyplus.gov
> >
> >The group web site is:
> >http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are currently allowed but be mindful that not everyone 
> >has a high speed connection.  Limit attachments to small files.
> >
> >EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf 
> >under the Documentation link and press the "search" button.
> >Yahoo! Groups Links
> >
> >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/