[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Glazed Facade



Hey Pedro, 

Thank you very much for your help. That was really helpful.

Alkis

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Pedro Peixeiro <ppeixeiro@...> wrote:
>
> Hi alkis
> 
> Instead of assigning glazed materials to a wall, you must define a 
> window surface in the wall, and then assign the layers and glazed 
> materials of the window to that surface. you can draw the window 
> practically as large as the wall itself. To define a window surface, you 
> can use FenestrationSurface:Detailed object, for example.
> 
> Pedro
> 
> On 06-09-2011 6:49, alkis_energyplus wrote:
> >
> > Hey all,
> >
> > I am using E+ as part of my dissertation thesis were I have to assess 
> > the energy performance of an existing building. The main side of this 
> > building is fully glazed; it uses double glazed alouminium framed 
> > curtain wall.
> >
> > Since I did not know how to present this I made a wall construction 
> > using Low E tint glass, air gap and Low E 6mm clear. However, when I 
> > run the simulation I get a severe error of having window materials in 
> > the wall.
> >
> > Any ideas as to how to overcome this?
> >
> > Thanx in advance
> >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/