Hi, Xavier
What is your occupation? Student, Building designer/certifier, HVAC dealer, or Postgraduate student.
Why do you have a building without external walls? Partition is not a wall in EPlus.
Why do you have a VAV damper while the fan is of constant speed and there is only one room to control?
Why do you need an air loop and VAV damper with no-reheat, and cooled with 12 °C supply in zone sizing?
Why do you have a water use object in the conference room?
Your building is not set up, that is why the EPlus cannot run. I do not correct building design with 12 places of decimal points.
Test your building without any equipment and you will get the same errors.
I do not test an IDF without a DesignDay object.
Because you file was posted in the wrong folder, it was not readily visible.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: rockcolomiers@xxxxxxxxxxx
Date: Tue, 18 Oct 2011 08:26:01 +0000
Subject: [EnergyPlus_Support] Re: Help me to create the VAV system and zone
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
What is your occupation? Student, Building designer/certifier, HVAC dealer, or Postgraduate student.
Why do you have a building without external walls? Partition is not a wall in EPlus.
Why do you have a VAV damper while the fan is of constant speed and there is only one room to control?
Why do you need an air loop and VAV damper with no-reheat, and cooled with 12 °C supply in zone sizing?
Why do you have a water use object in the conference room?
Your building is not set up, that is why the EPlus cannot run. I do not correct building design with 12 places of decimal points.
Test your building without any equipment and you will get the same errors.
I do not test an IDF without a DesignDay object.
Because you file was posted in the wrong folder, it was not readily visible.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: rockcolomiers@xxxxxxxxxxx
Date: Tue, 18 Oct 2011 08:26:01 +0000
Subject: [EnergyPlus_Support] Re: Help me to create the VAV system and zone
Hey,
My system is set up, but I've some errors, mainly about node connection, someone could look it and help me ?
IDF and ERROR files are in the FILES menu, name : XAVIER_VAV_SINGLEROOM.rar
thank you everyone !
and mainly R.Raustad and Dr.LI
My system is set up, but I've some errors, mainly about node connection, someone could look it and help me ?
IDF and ERROR files are in the FILES menu, name : XAVIER_VAV_SINGLEROOM.rar
thank you everyone !
and mainly R.Raustad and Dr.LI
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___