[EnergyPlus_Support] Re: Combining different parameters in one file

["simonflorian2002" <floriansi@xxxxxxxxxxx>]

To compare the result of your simulation all together, you can use the EP-Compare tool. It can give you a good view for general results.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ask_ami" <ask_ami@...> wrote:
>
> Hi Linda,
> 
> Thanks for your reply. I am also looking at changing/assigning a new schedule over an existing schedule in a DOE prototype building input file. How can I get a combined final output file where I can compare the base design (DOE prototype) with energy savings from run1, run2 etc.? In run1, run2 I would change things like schedule for lighting power density (LPD), set/deck point temperature schedule etc.  
> 
> If this is not possible, I would have to compare results from different files for all the runs separately. Is there a better way of doing this? I am familiar how to do this in e-Quest not sure if this is possible in Energy plus.
>   
> Thanks
> Amruta.
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> >
> > Read about the Parametric Preprocessor and/or the EP-Macro 
> > program.  Did you happen to run a search on the documentation for "parametric"?
> > 
> > In a word, yes you can.
> > 
> > There are also some preprocessors that are designed to help with 
> > parametric runs -- you should look at the energyplus website for 
> > hints on those.
> > 
> > At 02:43 PM 10/30/2011, ask_ami wrote:
> > >Hello All,
> > >
> > >Is there a way I can run Parametric studies in Energyplus? I wanted 
> > >to run different parameters on a base design in one single file. Is 
> > >that possible or will I have to create those many different 
> > >parametric files? Otherwise is there any other software anybody has 
> > >been using to combine parametric runs?
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/