[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Regarding the Temperature Set point and Fan night cycle on/off
Hi every one
1.If a zone temperature is above or Below the Temperatue set point of (68 - 76)F the zone hour is considered un met hour, my question is which standard sets these limits of (68-76)F and in which document could i be able to find this. and is the temperature limit is 68-76 F or is there any tolerences.
2."Fan should be cycled on during un occupied hours as per ASHRAE 90.1 G 3.1.2.4 .If the supply fan is modeled as cycling and fan energy is included in the energy-efficiency rating of the equipment, fan energy shall not be modeled explicitly". my question is wether the fan should be cycled on/off in both the base and the proposed case. if the Fan power is not splitted and it is included in the EER of the unit , when the fan is cycling the cooling unit will not run and the energy will not be consumed by the fan. the energy will only be consumed when the cooling unit is running , since the EER for the unit is inclusive of the fan energy . since there wont be any energy consumption during the cycling time , why do we need to do this. can we model the building with out the cycling.
Regards
vignesh.
--
vigneshkumar
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___