Thanks, Ned! I forgot about the losses to the ground, even though I always include it for an indoor pool. I’ll think about that one… My approach for indoor ground losses is to make the pool volume a “basement zone” which is at the same temp as the pool water, then report its losses as part of the water heating process load. That doesn’t work quite the same for an outdoor pool, since I’ll need a separate “building”, instead of a special zone within the already-defined building. The Building Performance Team From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Edward G. Lyon I’m not sure that you can do this calculation with any reliable accuracy. There are several formulas for pool water evaporation, some of which include potential wind effects, but this is only part of your load. Some of the formulas are based on operational experience for indoor pools by equipment manufacturer’s specifically for their product performance. The pool water is also loosing heat to the ground at some not well defined rate. I had one pool that was into ground water and had an underground flow inc
Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |