[EnergyPlus_Support] Re: HVAC template

[Nacho Gomis <nachogo27@xxxxxxxxx>]

Yes,you are right.
You use the template which is easier to set up.You have to fill less fields.
When you run the simulation EnergyPlus "expand" your templates and
create the objects that are needed for your HVAC. You will not have to
define the inlet/outlet node because EnergyPlus will do itself.
You will have after the simulation a new file on your folder
"Example.expidf" which is your idf after being processed and expanded
by EnergyPlus. You can rename it to "Example_exp.idf" and you will
have the idf file with all your objects created. You will have all
your nodes too.
I hope it helps you,
Ignacio Gomis


------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/