Re: [EnergyPlus_Support] Max Iterations exceeded?

[H2J <gch2j2006@xxxxxxxxx>]

Dr Li-True. That is the first the cooling is turned on but it concerns me b=
ecause big zones that I have called out for, their coils are sizing to be z=
ero.=C2=A0 I've attached both the IDF and a csv file of the output variable=
s I've been looking at.

In the csv file, if you look at chart 6, it is graphing the=20
heating setpoints (in red), cooling setpoints (in green) along with the=20
zone air temperature (in blue) for the two summer and winter design=20
days.  Everything is within the setpoints there.

Chart 7 graphs the same but during a month (July) typical for cooling.=20=20
The blue line is always out of range for the cooling setpoints that I've


WARNING: The remainder of this message has not been transferred.
The estimated size of this message is 11578628 bytes.
Click on the Retrieve From Server icon above and check mail again to get the whole thing. (If you're reading this in the preview pane, you'll need to open the message to see the icon.)  If the Retrieve From Server icon is not showing, then this message is no longer on the server.