RE: [EnergyPlus_Support] Problems modeling a chiller

[Nacho Gomis <nachogo27@xxxxxxxxx>]

Without looking at your file…
·         Does the pump have sufficient flow to properly transfer the 1MW?
Well,1MW is the cooling capacity,so the condenser will have a higher
value but never be 2MW.The pump flow rate is manually sized because
this data is provided by the chiller manufacturer,the value is
0.05743m3/s and it is used in the corresponding field in the
ElectricChiller:ReformulatedEIR object.(Chiller model:Carrier 30XW
1002)

·         Is the pump operating? (schedule = 1.0)
Yes,i have not scheduled the pump.It works fine with the template chiller
·         Is the tower operating?
Yes,it has cooling capacity because I can see it in the output that
Richard told me in the message above.

Thanks,
Ignacio Gomis


------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/