[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: I need your help
Modelling is all about assumptions and simplifications.
How big or small the task is depends on this.
What is being asked of the model? Is it to investigate exsisting alternitives of envelope and geometry only? Is it supposed to predict energy usage "as built" on a hourly basis with kW accuracy of real life? Or is it something in between. If the client expects high accuracy and granularity and the performance of each individual system, tell them that they can't afford it. It would take an expert team several months to finish the model and is no task for one bigginer by himself.
I've been working in many roles on the new airport in Berlin. In my company it has taken two people 3 months to model and simmulate the design heating and cooling demands as per the German norms. Just the loads are simmulatet at ideal conditions.
It took me 2 months to simulate a very simplified geometry of the airport dynamically using a roughly equivallent AHU with an evaporitive cooler in the exhaust before the thermal wheel heat exchanger coupled to a VAV system with CO2 demand ventilation, chilled ceilings and floors and fancoils, using Design Builder and e+ just for the dynamic reaction and control for only the design cooling day. These building are complex in the number of systems not the physical size. Yes, exhaust fans (fatty air exhaust) and kitchen modelling is important.
Like Marcus said, protect yourself contractually, as the big building companies are political and rutheless. People don't realize how huge these things are. I'm currently simulating the air and water hydrolics to find the regulation setpoints on valves and regulators. The results table of one of my ceiling loops was over 300 pages, and there are about 100 loops to do. We are using expensive softwares with special interfaces to use existing 3D hvac geometry to expediate things and still it takes ages.
Even worse is that plan changes are still comming in.
Good luck.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Mário <mneves32@...> wrote:
>
> Hello Everyone,
> I need to run a lot of simulations. To do this in a realistic time I need to automatically run E+ using code automation. Is there any documentation on how to do this?
> Thank You
> MN
>
As an HVAC engineer
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "syrianboy2002" <syrianboy4ever@...> wrote:
>
>
> First of all I want to explain my BIG project that needs to be modelled.
>
> Information:
>
> -The total building area exceeds 500,000 sq.mt (GF+1st+2nd+3rd+B2+B1)
> floors (Airport in Kuwait)(15 MAP)
>
> -Central Plan consists of (18 parrallel chillers, CHWP(9 primary, 11
> secondary + 9 condenser water pumps), 18 cooling towers) District
> Cooling only.
>
> -More than +180 AHUS (100% FAHU , AHUs for Displacement Ventilation, VAV
> AHUs, CAV AHUs (for substation) ).
>
> My questions:
>
> E+ is new for me, I have done all exercises in the getting started. I'm
> aware of most of the classes and objects.
>
> -Can you guide me on the process of taking this project forward in E+?
>
> -Do I have to model all of the equipment mentioned up, in addition to
> other Exhause Fans, Smoke Fans..etc?
>
> I mean you can imagine the project how big it is.
>
> My Available Data:
>
> -I have the 3d model of the project in googlesketchup(openstudio) (I'm
> aware of using this tool).
>
> -I have completed till the "Schedules Class" in the .IDF file.
>
> Recommendations:
>
> -I prefer to work on the 3d model in googlesketchup, since the profile
> of the building is complicated (your advice is still appreciated).
>
> Best Regards,
>
> Ameen Mattar
>
> Mechanical Engineer
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/