[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Saving the log file





thanks, I suspect the RunEPlus batch file may save the .log file but EPL-Run that is used with EP-Launch does not.

At 06:23 AM 2/24/2012, simonflorian2002 wrote:
The information comes from the OutputDetailsAndExamples.pdf file from the E+ documentation.

"eplusout.log

When EnergyPlus is running, it is usually running from a â??commandâ?? window (unless inside another interface program) and some items may appear in the command window. These messages are preserved in the â??logâ?? output file."

I assumed than it was possible to access these data after the simulation finished (the command windows close automatically)


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> Where did you read that it is saved?
>
> I believe if you run with EP-Launch, you will
> need to add commands to the EPL-Run batch file to
> save it, but then you won't see it as it
> runs.  There would be no way to trigger this from the IDF that I can think of.
>
> At 01:27 AM 2/24/2012, simonflorian2002 wrote:
> >Dear forum, I wish I could save what is written
> >in the command windows during the simulation. I
> >read that the message in saved in the â??logâ??
> >output file, but I canâ??t find this file in my
> >outputs filesâ?¦ Is it save somewhere else or do
> >I need do enter a specific line in the idf to save this file?
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___