[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
They are on the same line on my computer, it became two lines when I past it here.
Thanks.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> Sorry I did not see your other mail. As your lines in the mail are short, are they actually on two lines, or wrapped by the editor. The long comment should be on the same line.
>
> Dr. Li
> To: energyplus_support@xxxxxxxxxxxxxxx
> From: yli006@...
> Date: Fri, 24 Feb 2012 07:52:38 -0500
> Subject: RE: [EnergyPlus_Support] Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> What I meant was the following:
>
> CM DSOA Perim_bot_ZN_8, !- Design Specification Outdoor Air Object Name 8
> 1, !- Zone Air Distribution Effectiveness in Cooling Mode 8 {dimensionless}
> 1, !- Zone Air Distribution Effectiveness in Heating Mode 8 {dimensionless}
> , !- Zone Air Distribution Effectiveness Schedule Name 8
> Perim_bot_ZN_7, !- Zone 9 Name
> CM DSOA Perim_bot_ZN_7, !- Design Specification Outdoor Air Object Name 9
> 1, !- Zone Air Distribution Effectiveness in Cooling Mode 9 {dimensionless}
> 1; !- Zone Air Distribution Effectiveness in Heating Mode 9 {dimensionless}
> ==========
> ,!- Zone Air Distribution Effectiveness Schedule Name 9
>
> You have changed the second last line with a semicolon and left out the last line.
> IDFeditor would usually correct this ommision, unless the schedule is an otional line.
>
> Have you tried this correction?
>
> Dr. Li
>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: xukevin24@...
> Date: Fri, 24 Feb 2012 01:13:11 +0000
> Subject: [EnergyPlus_Support] Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi,all,
>
>
>
> Although I can successfully run a simulation, I received several warning messages in the error log as
>
>
>
> " ** Warning ** Zone name = PERIM_BOT_ZN_7 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_BOT_DCV
>
> ** ~~~ ** Ventilation per unit floor area h
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___