Sorry I did not see your other mail.
As your lines in the mail are short, are they actually on two lines, or wrapped by the editor.
The long comment should be on the same line.
Dr. Li
To: energyplus_support@xxxxxxxxxxxxxxx
From: yli006@xxxxxxxxxxx
Date: Fri, 24 Feb 2012 07:52:38 -0500
Subject: RE: [EnergyPlus_Support] Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
As your lines in the mail are short, are they actually on two lines, or wrapped by the editor.
The long comment should be on the same line.
Dr. Li
To: energyplus_support@xxxxxxxxxxxxxxx
From: yli006@xxxxxxxxxxx
Date: Fri, 24 Feb 2012 07:52:38 -0500
Subject: RE: [EnergyPlus_Support] Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
What I meant was the following:
CM DSOA Perim_bot_ZN_8, !- Design Specification Outdoor Air Object Name 8
1, !- Zone Air Distribution Effectiveness in Cooling Mode 8 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 8 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 8
Perim_bot_ZN_7, !- Zone 9 Name
CM DSOA Perim_bot_ZN_7, !- Design Specification Outdoor Air Object Name 9
1, !- Zone Air Distribution Effectiveness in Cooling Mode 9 {dimensionless}
1; !- Zone Air Distribution Effectiveness in Heating Mode 9 {dimensionless}
==========
,!- Zone Air Distribution Effectiveness Schedule Name 9
You have changed the second last line with a semicolon and left out the last line.
IDFeditor would usually correct this ommision, unless the schedule is an otional line.
Have you tried this correction?
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: xukevin24@xxxxxxxxx
Date: Fri, 24 Feb 2012 01:13:11 +0000
Subject: [EnergyPlus_Support] Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
CM DSOA Perim_bot_ZN_8, !- Design Specification Outdoor Air Object Name 8
1, !- Zone Air Distribution Effectiveness in Cooling Mode 8 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 8 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 8
Perim_bot_ZN_7, !- Zone 9 Name
CM DSOA Perim_bot_ZN_7, !- Design Specification Outdoor Air Object Name 9
1, !- Zone Air Distribution Effectiveness in Cooling Mode 9 {dimensionless}
1; !- Zone Air Distribution Effectiveness in Heating Mode 9 {dimensionless}
==========
,!- Zone Air Distribution Effectiveness Schedule Name 9
You have changed the second last line with a semicolon and left out the last line.
IDFeditor would usually correct this ommision, unless the schedule is an otional line.
Have you tried this correction?
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: xukevin24@xxxxxxxxx
Date: Fri, 24 Feb 2012 01:13:11 +0000
Subject: [EnergyPlus_Support] Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"
Hi,all,
Although I can successfully run a simulation, I received several warning messages in the error log as
" ** Warning ** Zone name = PERIM_BOT_ZN_7 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_BOT_DCV
** ~~~ ** Ventilation per unit floor area has not been specified for this zone, which is connected to
** ~~~ ** the air loop served by Controller:OutdoorAir = PACU_VAV_BOT_OA_CONTROLLER. Simulation will continue...
** Warning ** PEOPLE object for zone = PERIM_BOT_ZN_7 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_BOT_DCV
** ~~~ ** A "PEOPLE" object has been specified in the idf for this zone, but it is not included in this Controller:MechanicalVentilation Object.
** ~~~ ** Check Controller:MechanicalVentilation object. Simulation will continue.
** Warning ** Zone name = PERIM_MID_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_MID_DCV
** ~~~ ** Ventilation per unit floor area has not been specified for this zone, which is connected to
** ~~~ ** the air loop served by Controller:OutdoorAir = PACU_VAV_MID_OA_CONTROLLER. Simulation will continue...
** Warning ** PEOPLE object for zone = PERIM_MID_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_MID_DCV
** ~~~ ** A "PEOPLE" object has been specified in the idf for this zone, but it is not included in this Controller:MechanicalVentilation Object.
** ~~~ ** Check Controller:MechanicalVentilation object. Simulation will continue.
** Warning ** Zone name = PERIM_TOP_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_TOP_DCV
** ~~~ ** Ventilation per unit floor area has not been specified for this zone, which is connected to
** ~~~ ** the air loop served by Controller:OutdoorAir = PACU_VAV_TOP_OA_CONTROLLER. Simulation will continue...
** Warning ** PEOPLE object for zone = PERIM_TOP_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_TOP_DCV
** ~~~ ** A "PEOPLE" object has been specified in the idf for this zone, but it is not included in this Controller:MechanicalVentilation Object."
The building I simulated has 27 conditioned zones in total, but only those three zones shown up in the warning. I checked the classes of "DesignSpecification: OutdoorAir" for those zones, they are properly specified, and the object of "Controller:MechanicalVentilation" looks like this:
Controller:MechanicalVentilation,
PACU_VAV_BOT_DCV, !- Name
ALWAYS_ON, !- Availability Schedule Name
Yes, !- Demand Controlled Ventilation
VentilationRateProcedure,!- System Outdoor Air Method
Core_bottom, !- Zone 1 Name
CM DSOA Core_bottom, !- Design Specification Outdoor Air Object Name 1
1, !- Zone Air Distribution Effectiveness in Cooling Mode 1 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 1 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 1
Perim_bot_ZN_1, !- Zone 2 Name
CM DSOA Perim_bot_ZN_1, !- Design Specification Outdoor Air Object Name 2
1, !- Zone Air Distribution Effectiveness in Cooling Mode 2 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 2 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 2
Perim_bot_ZN_2, !- Zone 3 Name
CM DSOA Perim_bot_ZN_2, !- Design Specification Outdoor Air Object Name 3
1, !- Zone Air Distribution Effectiveness in Cooling Mode 3 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 3 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 3
Perim_bot_ZN_3, !- Zone 4 Name
CM DSOA Perim_bot_ZN_3, !- Design Specification Outdoor Air Object Name 4
1, !- Zone Air Distribution Effectiveness in Cooling Mode 4 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 4 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 4
Perim_bot_ZN_4, !- Zone 5 Name
CM DSOA Perim_bot_ZN_4, !- Design Specification Outdoor Air Object Name 5
1, !- Zone Air Distribution Effectiveness in Cooling Mode 5 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 5 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 5
Perim_bot_ZN_5, !- Zone 6 Name
CM DSOA Perim_bot_ZN_5, !- Design Specification Outdoor Air Object Name 6
1, !- Zone Air Distribution Effectiveness in Cooling Mode 6 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 6 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 6
Perim_bot_ZN_6, !- Zone 7 Name
CM DSOA Perim_bot_ZN_6, !- Design Specification Outdoor Air Object Name 7
1, !- Zone Air Distribution Effectiveness in Cooling Mode 7 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 7 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 7
Perim_bot_ZN_8, !- Zone 8 Name
CM DSOA Perim_bot_ZN_8, !- Design Specification Outdoor Air Object Name 8
1, !- Zone Air Distribution Effectiveness in Cooling Mode 8 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 8 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 8
Perim_bot_ZN_7, !- Zone 9 Name
CM DSOA Perim_bot_ZN_7, !- Design Specification Outdoor Air Object Name 9
1, !- Zone Air Distribution Effectiveness in Cooling Mode 9 {dimensionless}
1; !- Zone Air Distribution Effectiveness in Heating Mode 9 {dimensionless}
Something really odd is that all three zones with warning message appear at the end of the object of "controller:mechanicalventilation", and I tried to change the order of the zones under the controller, and found out that whichever zone sits in the end will show up in the warning message.
Can anyone explain to me why this warning occurs? and How to fix this? I worried about that those zones are not properly accounted as suggested by the warning message!
Thanks in advance.
Ke
Although I can successfully run a simulation, I received several warning messages in the error log as
" ** Warning ** Zone name = PERIM_BOT_ZN_7 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_BOT_DCV
** ~~~ ** Ventilation per unit floor area has not been specified for this zone, which is connected to
** ~~~ ** the air loop served by Controller:OutdoorAir = PACU_VAV_BOT_OA_CONTROLLER. Simulation will continue...
** Warning ** PEOPLE object for zone = PERIM_BOT_ZN_7 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_BOT_DCV
** ~~~ ** A "PEOPLE" object has been specified in the idf for this zone, but it is not included in this Controller:MechanicalVentilation Object.
** ~~~ ** Check Controller:MechanicalVentilation object. Simulation will continue.
** Warning ** Zone name = PERIM_MID_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_MID_DCV
** ~~~ ** Ventilation per unit floor area has not been specified for this zone, which is connected to
** ~~~ ** the air loop served by Controller:OutdoorAir = PACU_VAV_MID_OA_CONTROLLER. Simulation will continue...
** Warning ** PEOPLE object for zone = PERIM_MID_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_MID_DCV
** ~~~ ** A "PEOPLE" object has been specified in the idf for this zone, but it is not included in this Controller:MechanicalVentilation Object.
** ~~~ ** Check Controller:MechanicalVentilation object. Simulation will continue.
** Warning ** Zone name = PERIM_TOP_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_TOP_DCV
** ~~~ ** Ventilation per unit floor area has not been specified for this zone, which is connected to
** ~~~ ** the air loop served by Controller:OutdoorAir = PACU_VAV_TOP_OA_CONTROLLER. Simulation will continue...
** Warning ** PEOPLE object for zone = PERIM_TOP_ZN_8 is not accounted for by Controller:MechanicalVentilation object name = PACU_VAV_TOP_DCV
** ~~~ ** A "PEOPLE" object has been specified in the idf for this zone, but it is not included in this Controller:MechanicalVentilation Object."
The building I simulated has 27 conditioned zones in total, but only those three zones shown up in the warning. I checked the classes of "DesignSpecification: OutdoorAir" for those zones, they are properly specified, and the object of "Controller:MechanicalVentilation" looks like this:
Controller:MechanicalVentilation,
PACU_VAV_BOT_DCV, !- Name
ALWAYS_ON, !- Availability Schedule Name
Yes, !- Demand Controlled Ventilation
VentilationRateProcedure,!- System Outdoor Air Method
Core_bottom, !- Zone 1 Name
CM DSOA Core_bottom, !- Design Specification Outdoor Air Object Name 1
1, !- Zone Air Distribution Effectiveness in Cooling Mode 1 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 1 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 1
Perim_bot_ZN_1, !- Zone 2 Name
CM DSOA Perim_bot_ZN_1, !- Design Specification Outdoor Air Object Name 2
1, !- Zone Air Distribution Effectiveness in Cooling Mode 2 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 2 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 2
Perim_bot_ZN_2, !- Zone 3 Name
CM DSOA Perim_bot_ZN_2, !- Design Specification Outdoor Air Object Name 3
1, !- Zone Air Distribution Effectiveness in Cooling Mode 3 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 3 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 3
Perim_bot_ZN_3, !- Zone 4 Name
CM DSOA Perim_bot_ZN_3, !- Design Specification Outdoor Air Object Name 4
1, !- Zone Air Distribution Effectiveness in Cooling Mode 4 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 4 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 4
Perim_bot_ZN_4, !- Zone 5 Name
CM DSOA Perim_bot_ZN_4, !- Design Specification Outdoor Air Object Name 5
1, !- Zone Air Distribution Effectiveness in Cooling Mode 5 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 5 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 5
Perim_bot_ZN_5, !- Zone 6 Name
CM DSOA Perim_bot_ZN_5, !- Design Specification Outdoor Air Object Name 6
1, !- Zone Air Distribution Effectiveness in Cooling Mode 6 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 6 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 6
Perim_bot_ZN_6, !- Zone 7 Name
CM DSOA Perim_bot_ZN_6, !- Design Specification Outdoor Air Object Name 7
1, !- Zone Air Distribution Effectiveness in Cooling Mode 7 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 7 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 7
Perim_bot_ZN_8, !- Zone 8 Name
CM DSOA Perim_bot_ZN_8, !- Design Specification Outdoor Air Object Name 8
1, !- Zone Air Distribution Effectiveness in Cooling Mode 8 {dimensionless}
1, !- Zone Air Distribution Effectiveness in Heating Mode 8 {dimensionless}
, !- Zone Air Distribution Effectiveness Schedule Name 8
Perim_bot_ZN_7, !- Zone 9 Name
CM DSOA Perim_bot_ZN_7, !- Design Specification Outdoor Air Object Name 9
1, !- Zone Air Distribution Effectiveness in Cooling Mode 9 {dimensionless}
1; !- Zone Air Distribution Effectiveness in Heating Mode 9 {dimensionless}
Something really odd is that all three zones with warning message appear at the end of the object of "controller:mechanicalventilation", and I tried to change the order of the zones under the controller, and found out that whichever zone sits in the end will show up in the warning message.
Can anyone explain to me why this warning occurs? and How to fix this? I worried about that those zones are not properly accounted as suggested by the warning message!
Thanks in advance.
Ke
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___