[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] No flowrate in the plant loop. Please help!!
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] No flowrate in the plant loop. Please help!!
- From: "denergyplus" <denergyplus@xxxxxxxxx>
- Date: Mon, 30 Apr 2012 00:43:26 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Sun, 29 Apr 2012 18:43:29 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1335746608; bh=IJFEnkkxa5rr47nafhCifYoZXmm+IjIYeK/ZMY9G3ZE=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=HYKfQXcW41lkiZ4iFr9uJPh1ENrEQ4BdU4yofocVlrhDib14Yib3gC8cr0GLJBEqt4xiKDU0zmPohdjkFRZ9Un12yGPh0JMRFkncXp10kb8biHtVe2bv4GwyeGB2wveC
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=brUrd0Bp+vfuEobE9YpK5S9oIx73qwc845Cy7D4j5ZbzBhsvDzsh9eQEAjhqEDOrSpiM62P7h3sDcCvFfNFr+XBC7+4g4DsdpU/e8xTVOmEVLWRyre+oK7gpKEC5M/AS;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
Hi dear forum!
My model has LowTemperatureRadiant:VariableFlow as a zoneHVAC system, and GroundSource HeatPump as a plant with a VariableFlow Pump.
There's no air distribution system except zone airmodel(zone earth tube), thus, no humidity control so far.
But, the serious problem I have now is that there's zero flowrate in the water-side loop, thus the air temperature of the zone is very high(above 40C). Putting aside the high humidity problem(since there's no control for humidity yet) or lack of cooling capacity, I can't find the reason why the system doesn't react to the zone load at all.
I've been comparing to other example idf files for plant loop configuration, checked every operational schedules and so on for several days now. It feels like a dead-end..
Please, any advice will be a great help for me!
Thank you in advance!!
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/