[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Severe errors



Miroslav,

Thank you very much for suggestion.

It works perfectly.

Best regards, Veronika


From: Miroslav Bratanov <miroslav_bratanov@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Monday, May 7, 2012 8:18 PM
Subject: Re: [EnergyPlus_Support] Re: Severe errors

 
Hi Veronika,

There is no outside boundary condition object specified for both walls. This might be part of the problem. You should match the base surfaces. If you use OpenStudio right click on each surface and select "Intersect surface with model" first, redraw the doors just in case that the base surfaces names change, and then use the surface matching tool.

Miroslav

====
BuildingSurface:Detailed,
    19285A,  !- Name
    Wall,  !- Surface Type
    Interior Wall,  !- Construction Name
    bedroom1,  !- Zone Name
    Surface,  !- Outside Boundary Condition
    ,  !- Outside Boundary Condition Object
    NoSun,  !- Sun Exposure
    NoWind,  !- Wind Exposure
    0.0,  !- View Factor to Ground
    4,  !- Number of Vertices

BuildingSurface:Detailed,
    14DD24,  !- Name
    Wall,  !- Surface Type
    Interior Wall,  !- Construction Name
    bedroom2,  !- Zone Name
    Surface,  !- Outside Boundary Condition
    ,  !- Outside Boundary Condition Object
    NoSun,  !- Sun Exposure
    NoWind,  !- Wind Exposure
    0.0,  !- View Factor to Ground
    4,  !- Number of Vertices

On  7.05.2012 07:46, Jean marais wrote:
 
Thanks, that's exactly it. So now look in the io ref. on these objects for which options you have for the field surface type.
    Wall,  !- Surface Type
I suspect you want "partition" or some such word. I suspect wall refers to exterior wall. As for the Fenestration object...does it accept "door"? Perhaps only "window" works. Check this out.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Veronika Shabunko <veronikashabunko@...> wrote:
>
> Hi Jean,
>
> Thank you for clarification.
> this is the errors:
>
> Ã? ** Severe Ã? ** FenestrationSurface:Detailed="6004DB", invalid Building Surface Name="19285A".
> Ã?  Ã? ** Ã?  ~~~ Ã?  ** ... adiabatic surfaces cannot have windows or doors.
>
>
> Ã? ** Severe Ã? ** GetSurfaceData: SubSurface="6004DB" is an interzone subsurface.
> Ã?  Ã? ** Ã?  ~~~ Ã?  ** ..but the Base Surface is not an interzone surface, Surface="19285A".
>
> This is details in IDF file:
> Ã?  FenestrationSurface:Detailed,
> Ã?  Ã?  6004DB, Ã? !- Name
> Ã?  Ã?  Door, Ã? !- Surface Type
> Ã?  Ã?  Interior Door, Ã? !- Construction Name
> Ã?  Ã?  19285A, Ã? !- Building Surface Name
> Ã?  Ã?  70AEE4, Ã? !- Outside Boundary Condition Object
> Ã?  Ã?  , Ã? !- View Factor to Ground
> Ã?  Ã?  , Ã? !- Shading Control Name
> Ã?  Ã?  , Ã? !- Frame and Divider Name
> Ã?  Ã?  , Ã? !- Multiplier
> Ã?  Ã?  4, Ã? !- Number of Vertices
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 1 X-coordinate {m}
> Ã?  Ã?  2.362714590402, Ã? !- Vertex 1 Y-coordinate {m}
> Ã?  Ã?  5.150000000000, Ã? !- Vertex 1 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 2 X-coordinate {m}
> Ã?  Ã?  2.362714590402, Ã? !- Vertex 2 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 2 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 3 X-coordinate {m}
> Ã?  Ã?  3.312714590402, Ã? !- Vertex 3 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 3 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 4 X-coordinate {m}
> Ã?  Ã?  3.312714590402, Ã? !- Vertex 4 Y-coordinate {m}
> Ã?  Ã?  5.150000000000; Ã? !- Vertex 4 Z-coordinate {m}
>
> Ã? BuildingSurface:Detailed,
> Ã?  Ã?  19285A, Ã? !- Name
> Ã?  Ã?  Wall, Ã? !- Surface Type
> Ã?  Ã?  Interior Wall, Ã? !- Construction Name
> Ã?  Ã?  bedroom1, Ã? !- Zone Name
> Ã?  Ã?  Surface, Ã? !- Outside Boundary Condition
> Ã?  Ã?  , Ã? !- Outside Boundary Condition Object
> Ã?  Ã?  NoSun, Ã? !- Sun Exposure
> Ã?  Ã?  NoWind, Ã? !- Wind Exposure
> Ã?  Ã?  0.0, Ã? !- View Factor to Ground
> Ã?  Ã?  4, Ã? !- Number of Vertices
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 1 X-coordinate {m}
> Ã?  Ã?  0.301238000000, Ã? !- Vertex 1 Y-coordinate {m}
> Ã?  Ã?  6.000000000000, Ã? !- Vertex 1 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 2 X-coordinate {m}
> Ã?  Ã?  0.301238000000, Ã? !- Vertex 2 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 2 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 3 X-coordinate {m}
> Ã?  Ã?  3.401238000000, Ã? !- Vertex 3 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 3 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 4 X-coordinate {m}
> Ã?  Ã?  3.401238000000, Ã? !- Vertex 4 Y-coordinate {m}
> Ã?  Ã?  6.000000000000; Ã? !- Vertex 4 Z-coordinate {m}
>
> This error for other door:Ã? 
> Ã? Severe Ã? ** FenestrationSurface:Detailed="ADFA05", invalid Building Surface Name="14DD24".
> Ã?  Ã? ** Ã?  ~~~ Ã?  ** ... adiabatic surfaces cannot have windows or doors.
>
> Ã? BuildingSurface:Detailed,
> Ã?  Ã?  14DD24, Ã? !- Name
> Ã?  Ã?  Wall, Ã? !- Surface Type
> Ã?  Ã?  Interior Wall, Ã? !- Construction Name
> Ã?  Ã?  bedroom2, Ã? !- Zone Name
> Ã?  Ã?  Surface, Ã? !- Outside Boundary Condition
> Ã?  Ã?  , Ã? !- Outside Boundary Condition Object
> Ã?  Ã?  NoSun, Ã? !- Sun Exposure
> Ã?  Ã?  NoWind, Ã? !- Wind Exposure
> Ã?  Ã?  0.0, Ã? !- View Factor to Ground
> Ã?  Ã?  4, Ã? !- Number of Vertices
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 1 X-coordinate {m}
> Ã?  Ã?  0.001238000000, Ã? !- Vertex 1 Y-coordinate {m}
> Ã?  Ã?  6.000000000000, Ã? !- Vertex 1 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 2 X-coordinate {m}
> Ã?  Ã?  0.001238000000, Ã? !- Vertex 2 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 2 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 3 X-coordinate {m}
> Ã?  Ã?  2.626238000000, Ã? !- Vertex 3 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 3 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 4 X-coordinate {m}
> Ã?  Ã?  2.626238000000, Ã? !- Vertex 4 Y-coordinate {m}
> Ã?  Ã?  6.000000000000; Ã? !- Vertex 4 Z-coordinate {m}
>
> Ã? FenestrationSurface:Detailed,
> Ã?  Ã?  ADFA05, Ã? !- Name
> Ã?  Ã?  Door, Ã? !- Surface Type
> Ã?  Ã?  Interior Door, Ã? !- Construction Name
> Ã?  Ã?  14DD24, Ã? !- Building Surface Name
> Ã?  Ã?  B71D1D, Ã? !- Outside Boundary Condition Object
> Ã?  Ã?  , Ã? !- View Factor to Ground
> Ã?  Ã?  , Ã? !- Shading Control Name
> Ã?  Ã?  , Ã? !- Frame and Divider Name
> Ã?  Ã?  , Ã? !- Multiplier
> Ã?  Ã?  4, Ã? !- Number of Vertices
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 1 X-coordinate {m}
> Ã?  Ã?  0.080310744001, Ã? !- Vertex 1 Y-coordinate {m}
> Ã?  Ã?  5.150000000000, Ã? !- Vertex 1 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 2 X-coordinate {m}
> Ã?  Ã?  0.080310744001, Ã? !- Vertex 2 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 2 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 3 X-coordinate {m}
> Ã?  Ã?  1.030310744001, Ã? !- Vertex 3 Y-coordinate {m}
> Ã?  Ã?  3.000000000000, Ã? !- Vertex 3 Z-coordinate {m}
> Ã?  Ã?  -7.537950000000, Ã? !- Vertex 4 X-coordinate {m}
> Ã?  Ã?  1.030310744001, Ã? !- Vertex 4 Y-coordinate {m}
> Ã?  Ã?  5.150000000000; Ã? !- Vertex 4 Z-coordinate {m}
>
> Hope this is the info that you were referring in email.
>
> Thank you,Ã? 
>
> Best regards, Veronika
>
> ________________________________
> From: Jean marais <jeannieboef@...>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Sent: Friday, May 4, 2012 3:42 AM
> Subject: [EnergyPlus_Support] Re: Severe errors
>
>
> Ã? 
> Hi Veronika,
> Could you copy out of the idf the BuildingSurface:Detailed object and the Fenestration or door object code for the offending surfaces and post them here?
> Regards,
> Jean
> ps sorry for being a bit unclear before.
>






__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___