[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: IMF files & EP Macro



And when trying without ! after each (I thought I found the issue was I was writing to IDD, but did not work) 

Again to all who may know, any advise would be much appreciated. (one thing I am not sure of is if this has to be ran with command promp?) again many thanks

Program Version,EnergyPlus-32-MP 7.1.0.009+, 5/13/2012 4:39 PM,IDD_Version 7.1.0.009+
   ************* IP: IDF Line~15 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\M27.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~16 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\M51.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~17 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\M91.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~18 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\M182.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~19 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\Q21.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~20 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\Q23.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~21 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\Q25.inp
   ** Severe  ** , or ; expected on this line
   ************* IP: IDF Line~22 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\Q27.inp
   ** Severe  ** , or ; expected on this line
   ************* Beginning Zone Sizing Calculations
   ************* Testing Individual Branch Integrity
   ************* All Branches passed integrity testing
   ************* Testing Individual Supply Air Path Integrity
   ************* All Supply Air Paths passed integrity testing
   ************* Testing Individual Return Air Path Integrity
   ************* All Return Air Paths passed integrity testing
   ************* No node connection errors were found.
   ************* Beginning Simulation
   ************* Simulation Error Summary *************
   ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
   ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
   ************* EnergyPlus Completed Successfully-- 0 Warning; 8 Severe Errors; Elapsed Time=00hr 03min 26.77sec

Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
www.cleantechanalytics.com


This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics




On Sun, May 13, 2012 at 4:25 PM, CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx> wrote:
I changed the file extension to .inp, and followed what seemed to make since in the documentation but still got the error below when runing the attached files. Any advise as to what I am doing wrong?

Many thanks-

Program Version,EnergyPlus-32-MP 7.1.0.009+, 5/13/2012 4:17 PM,IDD_Version 7.1.0.009+
   ************* IP: IDF Line~15 ##include C:\Users\Jeremiah\Desktop\INP-EPMACRO\M27.inp
   ** Severe  ** , or ; expected on this line
   ************* Beginning Zone Sizing Calculations
   ************* Testing Individual Branch Integrity
   ************* All Branches passed integrity testing
   ************* Testing Individual Supply Air Path Integrity
   ************* All Supply Air Paths passed integrity testing
   ************* Testing Individual Return Air Path Integrity
   ************* All Return Air Paths passed integrity testing
   ************* No node connection errors were found.
   ************* Beginning Simulation
   ************* Simulation Error Summary *************
   ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
   ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
   ************* EnergyPlus Completed Successfully-- 0 Warning; 1 Severe Errors; Elapsed Time=00hr 03min 28.84sec

Jeremiah D. Crossett
CleanTech Analytics

This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics




On Sun, May 13, 2012 at 4:04 PM, CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx> wrote:
Thanks Linda, -- I had looked everywhere but in the auxiliary programs guide- 



Jeremiah D. Crossett
CleanTech Analytics

This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics




On Sun, May 13, 2012 at 3:51 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
 

EP Macro is described in the Auxiliary Programs document.

If you are using EP-Launch, there is a "inc" that can be set and tested
in each subsequent simulation. (I believe there is a simple example
shown in the files area here).

The output files from EP-Macro are put as "epmidf" and "epmdet"
extensions -- usually in the output files area. It looks like there was
a previous set of messages about this -- I will catch up to them
tomorrow.

Linda



On 13.05.2012 16:46, CleanTech Analytics wrote:
> Jean, 
> Thank you kindly for the advise;
>
> I have done as you advised, but I can not seem to find the output
> tables or csv files from the macro simulation. 
> I have attached my files, could you please help me out and point me
> in
> the right direction to use the EP Macro funtonality? My use is to be
> able to add PCM's to Energy Plus files in JE+ runs. I have it working
> by using 8 IDF's, but would much rather use the IMF/EP Macro
> method.. 
>
> Questions: Should I use single file, or group with all IMF's? Should
> I
> click repeat simulation for IMF in the number (8) of IMF files? 
>
> Many thanks 
>
> ! File generated by DesignBuilder - 3.0.0.104 3/18/2012 - 9:46:52 PM
> ! Source file: C:UsersJeremiahDocumentsDesignBuilder DataASHRAE Room

> Study.dsb
> Version,
>     7.1;                     !- Version Identifier
>
> ##include C:UsersJeremiahDesktopBioPCM IMF'sM27.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sM51.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sM91.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sM182.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sQ21.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sQ23.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sQ25.IMF
>
> !##include C:UsersJeremiahDesktopBioPCM IMF'sQ27.IMF

>
> !-   ===========  ALL OBJECTS IN CLASS: SIMULATIONCONTROL
> ===========
>
> Program Version,EnergyPlus-32-MP 7.1.0.009+, 5/13/2012 3:39
> PM,IDD_Version 7.1.0.009+
>    ************* IP: IDF Line~15 ##include
> C:UsersJeremiahDesktopBioPCM IMF'sM27.IMF

>    ** Severe  ** , or ; expected on this line
>    ************* Beginning Zone Sizing Calculations
>    ************* Testing Individual Branch Integrity
>    ************* All Branches passed integrity testing
>    ************* Testing Individual Supply Air Path Integrity
>    ************* All Supply Air Paths passed integrity testing
>    ************* Testing Individual Return Air Path Integrity
>    ************* All Return Air Paths passed integrity testing
>    ************* No node connection errors were found.
>    ************* Beginning Simulation
>    ************* Simulation Error Summary *************
>    ************* EnergyPlus Warmup Error Summary. During Warmup: 0
> Warning; 0 Severe Errors.
>    ************* EnergyPlus Sizing Error Summary. During Sizing: 0
> Warning; 0 Severe Errors.
>    ************* EnergyPlus Completed Successfully-- 0 Warning; 1
> Severe Errors; Elapsed Time=00hr 03min 36.24sec
>
> _Jeremiah D. Crossett_
> _CleanTech Analytics_
> _503-688-8951_
>
> _www.cleantechanalytics.com_ [1]

>
> This document may contain valuable information proprietary to
> CleanTech Analytics which is private and confidential. It may not be
> shared, copied, stored or transmitted in any form without the prior
> written consent of CleanTech Analytics
>
> On Sun, Mar 25, 2012 at 10:23 PM, Jean marais wrote:
>
>>  
>>
>> And to illistrate...here is a bit of code epmacro i used to create
>> the CO2 part of my idf for the different zones to which it must be
>> applied.
>> I ran this sepperately (still using eplaunch and just exchanged the
>> include file for the CO2 for this one. It expands into the CO2 idf
>> that I then later included...if that makes sense. Unfortunately it
>> expands with a character that has to be manually removed with find
>> and replace. I can't remember what the character was...possibly a
>> '#' or a space?
>>
>> ##DEF CO2_EMS_FOR_ZONES[mmZone]
>>
>
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> !EMS for Damper Control by CO2 Level
>> !*****THIS FILE IS USED TO GENERATE A FILE THAT HAS "" THAT NEED TO
>> BE REMOVED******!
>>
>
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> ! CC = CurrentCO2Concentration
>> ! CCSP = CurrentCO2SP
>> ! CDP = CurrentDamperPos
>> ! CO2SPUL = CO2_SP_Sensor UPPER LIMIT
>> ! CO2SPLL = CO2_SP_Sensor LOWER LIMIT
>> ! ODACO2SPUL = ODA CO2_SP_Sensor
>> ! ZDCS = ZDC_Sensor
>> ! ZDC = Zone_Damper_Changer
>> ! MDF = MINDAMPERFRACTION
>> ! CMM = CO2ModificationManager
>> ! CMMPr = CO2ModificationManager Program
>> ! CS = CO2_Sensor
>> ! DaLL = Damper Lower Limit
>>
>> EnergyManagementSystem:GlobalVariable,
>> #[mmZone // _CC] ,
>> #[mmZone // _CCSP ] ,
>> #[mmZone // _CDP ] ,
>> #[mmZone // _dDamper ] ,
>> #[mmZone // _dCO2 ] ,
>> #[mmZone // _MM ] ,
>> #[mmZone // _ODACO2SPULV ],
>> #[mmZone // _CO2SPULV ],
>> #[mmZone // _CO2SPLLV ],
>> #[mmZone // _DaLLV ]; !- Erl Variable 2 Name
>>
>> EnergyManagementSystem:Sensor,
>> #[mmZone // _CS] , ! Sensor Name...reporting temperature
>> mmZone ,! Output:Variable or Output:Meter Index Key Name
>> Output:Variable,*,Outdoor Dry Bulb,hourly; !- Zone Average [C]
>> Zone Air Carbon Dioxide Concentration ; ! Output:Variable or
>> Output:Meter Name
>>
>> EnergyManagementSystem:Sensor,
>> #[mmZone // _ODACO2SPUL] , ! Sensor Name...reporting temperature
>> Outdoor CO2 Schedule , ! Output:Variable or Output:Meter Index Key
>> Name Zone/Sys Thermostat Cooling Setpoint Output:Variable,*,Zone/Sys
>> Thermostat Cooling Setpoint,hourly; !- Zone Average [C]
>> Schedule Value ; ! Output:Variable or Output:Meter Name
>>
>> !Setpoint Value
>> EnergyManagementSystem:Sensor,
>> #[mmZone // _CO2SPLL] , ! Sensor Name...reporting schedule
>> properties
>> CO2SPLL , ! Output:Variable or Output:Meter Index Key Name Zone/Sys
>> Thermostat Cooling Setpoint Output:Variable,*,Zone/Sys Thermostat
>> Cooling Setpoint,hourly; !- Zone Average [C]
>> Schedule Value ; ! Output:Variable or Output:Meter Name
>>
>> !Setpoint Value
>> EnergyManagementSystem:Sensor,
>> #[mmZone // _CO2SPUL] , ! Sensor Name...reporting schedule
>> properties
>> CO2SPUL , ! Output:Variable or Output:Meter Index Key Name Zone/Sys
>> Thermostat Cooling Setpoint Output:Variable,*,Zone/Sys Thermostat
>> Cooling Setpoint,hourly; !- Zone Average [C]
>> Schedule Value ; ! Output:Variable or Output:Meter Name
>>
>> EnergyManagementSystem:Sensor,
>> #[mmZone // _DaLL] , !- Name
>> DaLL , ! Output:Variable or Output:Meter Index Key Name...in this
>> case !-EnergyManagementSystem:Actuator Available,COOLING SP
>> SCH,Schedule:Compact,Schedule Value,[ ]
>> Schedule Value ;!Damper Lower Limit Schedule
>>
>> EnergyManagementSystem:Sensor,
>> #[mmZone // _ZDCS] , !- Name
>> mmZone MDF , ! Output:Variable or Output:Meter Index Key Name...in
>> this case !-EnergyManagementSystem:Actuator Available,COOLING SP
>> SCH,Schedule:Compact,Schedule Value,[ ]
>> Schedule Value ;!VAV Terminal Damper Position ; ! Output:Variable
>> or Output:Meter Name
>>
>> ! , Component Unique Name, Component Type, Control Type, Units

>> !EnergyManagementSystem:Actuator
>> Available,MDF,Schedule:Compact,Schedule Value,[ ]
>> EnergyManagementSystem:Actuator,
>> #[mmZone // _ZDC] , !- Name
>> mmZone MDF , !- Actuated Component Unique Name...in this case
>> !-EnergyManagementSystem:Actuator Available,COOLING SP
>> SCH,Schedule:Compact,Schedule Value,[ ]
>> Schedule:Compact, !- Actuated Component Type
>> Schedule Value ; !- Actuated Component Control Type
>>
>> !***Program Calling Proceedure***
>> EnergyManagementSystem:ProgramCallingManager,
>> #[mmZone // _CMM] , ! Name
>> AfterPredictorAfterHVACManagers,!BeginTimestepBeforePredictor , !
>> EnergyPlus Model Calling Point
>> #[mmZone // _CMMPr] ; ! Program 1 Name
>>
>> !***Main Program***
>> !******************
>> EnergyManagementSystem:Program,
>> #[mmZone // _CMMPr] , ! Program 1 Name
>> SET #[mmZone // _ODACO2SPULV ] = #[mmZone // _ODACO2SPUL],
>> SET #[mmZone // _CO2SPULV ] = #[mmZone // _CO2SPUL],
>> SET #[mmZone // _CO2SPLLV ] = #[mmZone // _CO2SPLL],
>> SET #[mmZone // _DaLLV ] = #[mmZone // _DaLL] ,
>> SET #[mmZone // _CC] = #[mmZone // _CS] ,
>> SET #[mmZone // _CDP] = #[mmZone // _ZDCS] ,
>> SET #[mmZone // _dDamper ] = (1 - #[mmZone // _DaLLV ]), !max min
>> damper positions
>> SET #[mmZone // _dCO2 ] = #[mmZone // _CO2SPULV] - #[mmZone //
>> _CO2SPLLV] , !max min CO2 levels, i.e. SP and ODA CO2
>> SET #[mmZone // _MM ] = 1 - (#[mmZone // _dDamper ] / #[mmZone //
>> _dCO2 ] * #[mmZone // _CO2SPULV] ) ,
>>
>> IF (#[mmZone // _CC] >= #[mmZone // _CO2SPLLV ] ) && (#[mmZone //
>> _CC] #[mmZone // _CO2SPULV ] ,
>> SET #[mmZone // _ZDC] = 1 ,
>> ENDIF;
>>
>> !***End Main Program***
>> !**********************
>> ##EndDEF
>> CO2_EMS_FOR_ZONES [U12]
>> CO2_EMS_FOR_ZONES [PE00WN]
>> CO2_EMS_FOR_ZONES [PE00WS]
>> CO2_EMS_FOR_ZONES [PE00WW]
>> CO2_EMS_FOR_ZONES [PE0Z02W]
>> CO2_EMS_FOR_ZONES [PE03W]
>> CO2_EMS_FOR_ZONES [HE00]
>> CO2_EMS_FOR_ZONES [HE0Z03]
>> CO2_EMS_FOR_ZONES [PavN]
>> CO2_EMS_FOR_ZONES [PavS]
>>
>> !*******************************************DEFINE DAMPER SCHEDULES
>> FOR ZONES*****************************
>> ##def DAMPER_SCH_ZONES[mmZone]
>>
>> Schedule:Compact,
>> mmZone MDF,
>> Fraction,
>> Through: 12/31,
>> For: AllDays,
>> Until: 05:00, 0.3,!0,
>> Until: 23:00, 0.7,
>> Until: 24:00, 0.3;
>>
>> ##EndDef
>>
>> DAMPER_SCH_ZONES [U12]
>> DAMPER_SCH_ZONES [PE00WN]
>> DAMPER_SCH_ZONES [PE00WS]
>> DAMPER_SCH_ZONES [PE00WW]
>> DAMPER_SCH_ZONES [PE0Z02W]
>> DAMPER_SCH_ZONES [PE03W]
>> DAMPER_SCH_ZONES [HE00]
>> DAMPER_SCH_ZONES [HE0Z03]
>> DAMPER_SCH_ZONES [PavN]
>> DAMPER_SCH_ZONES [PavS]
>> !*******************************************END DEFINE DAMPER
>> SCHEDULES FOR ZONES **********************
>
>
>
> Links:
> ------
> [1] http://www.cleantechanalytics.com
> [2] mailto:jeannieboef@xxxxxxxxx
> [3] http://energyplus.helpserve.com
> [4] http://www.energyplus.gov
> [5] http://groups.yahoo.com/group/EnergyPlus_Support/
> [6]
>
> http://groups.yahoo.com/group/EnergyPlus_Support/join;_ylc=X3oDMTJmNzFiZ3NhBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEzMzY5NDkxODQ-
> [7]
>
> mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx?subject=EmailDelivery:Digest
> [8]
>
> http://groups.yahoo.com/group/EnergyPlus_Support;_ylc=X3oDMTJkYnN0NGdsBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMzM2OTQ5MTg0
> [9] http://docs.yahoo.com/info/terms/
> [10]
>
> mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe






__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\BASELINE-INCLUDE-BioPCM-INP1.IDF