Hey thanks linda and richard for the help, I had e plus installed on my program files foldes, I changed to the root and now its working better, I still get a fatal error but at least I can see the err file jaja. Anyway, ill try to solve this on my own, if no light bulb turn on in my head you'll be hearing from me again!
Thanks again
Valentin
Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)
From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
Date: Wed, 16 May 2012 14:08:13 -0600
To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
ReplyTo: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: inevitable crash
As you also sent this to the Helpdesk, an answer was
supplied from there.
At 02:05 PM 5/16/2012, Valentin Schmidt wrote:
Hi guys thanks for the advice, the thing is that the simulation crashes before the error files are even generated. At least this is what i think because ive been unable to open them, even trying what you suggested.
Ive attached the error reports the software shows, anyone knows whats going on?
thanks!
valentin.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Richard Raustad <RRaustad@...> wrote:
>
> And make sure other open windows of results are closed before you
> simulate again. Only some files cause problems.
>
> On 4/26/2012 4:07 PM, CleanTech Analytics wrote:
> >
> >
> > Check your .err file and it should tell you the issue.
> >
> > You can do this by choosing "view single file .err" or by using one of
> > the "create sets" output buttons and choosing the .err file.
> >
> > The .err file should be your first file to review prior to other files
> > so that you can see any issues...
> >
> > If the results in the .err file do not make since to you post back to
> > the list and myself or someone else will respond with advise- Best of luck
> >
> >
> > /Jeremiah D. Crossett/
> > /CleanTech Analytics/
> > /503-688-8951/
> > / www.cleantechanalytics.com/ < http://www.cleantechanalytics.com>
> >
> >
> > *
> >
> > This document may contain valuable information proprietary to
> > CleanTech Analytics which is private and confidential. It may not be
> > shared, copied, stored or transmitted in any form without the prior
> > written consent of CleanTech Analytics
> >
> > *
> >
> >
> >
> > On Thu, Apr 26, 2012 at 12:55 PM, tinoelargentino
> > <valentinsch@... <mailto:valentinsch@...>> wrote:
> >
> > Hey guys, i´m new with e-plus, and while going through the
> > tutorials in the getting started pdf I started getting crashes
> > when trying to simulate the files. At the beginning simulations
> > went ok, but then the same files that I had simulated earlier
> > started crashing immediately. Even the included examples crash
> > now. What may be the problem?
> >
> > the run status reports:
> >
> > C:\~\Exercise2A.idf
> > No weather files
> > Crashed
> >
> > thats it...
> >
> > any help will be useful!
> >
> >
> >
> >
> >
>
> --
> Richard A. Raustad
> Senior Research Engineer
> Florida Solar Energy Center
> University of Central Florida
> 1679 Clearlake Road
> Cocoa, FL 32922-5703
> Phone: (321) 638-1454
> Fax: (321) 638-1439 or 1010
> Visit our web site at: http://www.fsec.ucf.edu
>
> UCF - From Promise to Prominence: Celebrating 40 Years
>
Content-Type: image/jpeg; name="crash1.JPG"
Content-Disposition: attachment; filename="crash1.JPG"
X-Attachment-Id: f_h2atkeh70
Content-Type: image/jpeg; name="crash2.JPG"
Content-Disposition: attachment; filename="crash2.JPG"
X-Attachment-Id: f_h2atkhml1
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___