[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Wall with PCM



Hello,

I am working on my university study project and trying to simulate a building envelope with Phase Change Materials but it is not considering its phase change properties. I am getting the same answers with/without using phase change property. I have tried to change the positions of PCM and the building envelope on different walls but could not get the answers. I have also changed the weather files but could not get the answers as someone has suggested to a similar problem asked by a person. I have also attached the idf file, if someone can look where the problem is existing. 

Thanks 

--
Best Regards,
Ghulam Mujtaba 



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\PCM with schedules4.idf