[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] Re: Residential Multifamily Infiltration & Ventilation
Design builder currently has the capacity to produce CFD analysis of
air flow networks and the openings with presure velocity for internal
CFD and velocity and pressure for weather and external condishions.
The Input for external CFD is just the weather file and the geomitry,
the inputs for internal are to place vents and/or operable windows
where indicated by external CFD ( or wherever you choose ) then run
the simulation with " store openings" checked, then use the import
Energy Plus results into CFD for either an hour or sub- hourly period.
The resulting CFD indicates air vilocity, air pressure, air
temperature, operative temperature, radient temperature, Perdicted
mean vote, and Perdicted percent dissatisfied. Aside from CFD, when
using both scheduled and calculated natural ventalation design builder
can show graphics of air changes, and when exporting IDF full air
flow networks are configured. So the brunt of the inputs are simple
and geometry based~ it is the simplest to use method I have found for
natural ventalation due to the minimal inputs required.
Sent from my Windows Phone
-----Original Message-----
From: lisacng
Sent: 6/28/2012 7:06 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Residential Multifamily Infiltration
& Ventilation
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/