[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Actual Air flow ?



Dear Oscar,

The problem is , for the same window, I am getting different values  
from the variable 1 to 2 and 2 to 1 in the same hour. I have another  
window in opposite wall with the same problem.

Regards,

Alberto

Citando oscar hernandez <oscarhernandez_81@xxxxxxxxxxx>:

>
>
> THe value 1 to 2 or 2 to 1  is the flow rate. You have to inside or  
> to outside.
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: ahneto@xxxxxx
> Date: Fri, 29 Jun 2012 13:54:19 -0300
> Subject: [EnergyPlus_Support] Actual Air flow ?
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>       Dear Forum,
>
>
>
> I modeling a room with the AirFlowNetwork object. I would like to
>
> confirm the following:
>
>
>
> When I set as output variable AirflowNetwork Mass Flow Rate from Node
>
> 1 to 2 and AirflowNetwork Mass Flow Rate from Node 2 to 1 for a
>
> exterior window, the difference between these two variables will give
>
> the actual flow rate and the direction will be set verifiying which
>
> variable is greater?
>
>
>
> Regards,
>
>
>
> Alberto Hernandez Neto
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/