[EnergyPlus_Support] Re: ** Warning ** Calculated design cooling load for zone=EXISTINGWORKSHOP:ZONE1

["Jean marais" <jeannieboef@xxxxxxxxx>]

We've all had this at some point. Unfortunately, there are many possible causes. Report your predicted cooling load (predictor...somthing can't remember the variable name). If there is really no negative values predicted then your zone setpoint or setpoint schedule or designday setpoint schedule may be the problem.

If there is a load (negative number for cooling) and the coils are not jumping on, check their schedules, availibility managers, fan control modes and anything else that may stop the fan or coil from jumping on.

I may not find time to check your idf in the next 12 hours.



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/