Add request for output variables like these.
PV Generator DC Power
Inverter AC Power Output
Load Center Electric Power Produced
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Thodwris Xaritidis
Sent: Thursday, July 12, 2012 8:24 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Fw: [EnergyPlus_Support] pv electricity produded
Hello,
If I want to find out the amount of electricity produced by my PV in WATTS
which is the option? I have only found total pv electricity produced but in JOULES.
thank you
----- Forwarded Message -----
From: Ayzer Akguc <alpayakguc@xxxxxxxxx>
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <C>
Sent: Thursday, 12 July 2012, 14:52
Subject: Re: [EnergyPlus_Support] Setpoint Manager
Hi Karen,
Thanks for your attention.
I did your sugesstion. I used "AirLoop Supply Side Outlet Node" as node name in SetpointManager:Scheduled. I also wonder the sequensing of the fan, cooling coil and heating coil in VAV. Is there any importance of sequensing when I use "AirLoop Supply Side Outlet Node" as node name ? Now, the sequensing is fan, cooling coil then heating coil in my model. I mean, "AirLoop Supply Side Outlet Node" is the outlet air node of heating coil in my model.
Best regards
Alpay
From: Karen Walkerman <kwalkerman@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Thursday, July 12, 2012 4:25 PM
Subject: Re: [EnergyPlus_Support] Setpoint Manager
Hi Alpay,
For a VAV system with reheat, generally the central air system (AirLoopHVAC) provides cool air to every zone, and the reheat coils in the VAV boxes in the zone reheat the air to meet the setpoint temperature of each zone.
If you want to use SetpointManager:Scheduled to control the air temperature of the AirLoop, usually the AirLoop Supply Side Outlet Node is used as the setpoint.
For this system, you might also want to look at SetpointManager:SingleZone:Cooling and SetpointManager:MultiZone:Cooling. These setpoint managers vary the airloop outlet temperature based on the cooling needs of the zone or zones served.
--
Karen
On Thu, Jul 12, 2012 at 8:01 AM, Ayzer Akguc <alpayakguc@xxxxxxxxx> wrote:
Hi,
I would like to know the working of SetpointManager:Scheduled. How can I control the heating and cooling of VAV using SetpointManager:Scheduled ? Which node name should be written at "Setpoint Node or Nodelist Name" in SetpointManager:Scheduled for heating and cooling ?
Best regards
Alpay Akgüç
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___