[EnergyPlus_Support] Re: ExpandObjects warnings EnergyPlus 7.1 Linux

["joshdr_atx" <joshdr83@xxxxxxxxx>]

Thank you for your reply, the hard part for me comes when this happens:

-------------------------------------------------------------

parallels@parallels-Parallels-Virtual-Platform:~/Desktop$ chmod +x SetEPlusV710012-lin.sh
parallels@parallels-Parallels-Virtual-Platform:~/Desktop$ bash SetEPlusV710012-lin.sh
EnergyPlus install directory [/usr/local]:

Symbolic link location (enter "n" for no links) [/usr/local/bin]:
n
enter aes-256-cbc decryption password:
Problem decrypting file.  Verify password and try again.


-------------------------------------------------------------

I am not sure what to put for the install directory - I'd like it to go default so i just press enter.
Not sure what Symbolic links are about, so press n
Have no idea what the decryption password is...


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Edwin Lee <leeed2001@...> wrote:
>
> I have it installed on 12.04.  Download the installation script (just one
> file).  Chmod +x the file to give it executable permission.  Execute it
> from terminal.  If you install the executables or the symlinks into an
> admin area, you will need to run with sudo (sudo ./SetEPl....)
> 
> On Wed, Jul 18, 2012 at 2:12 PM, joshdr_atx <joshdr83@...> wrote:
> 
> > **
> >
> >
> > Hi
> >
> > this is not a direct answer to your question and I am sorry for that... I
> > am a noob at linux, but need to use it to harness some HPC capacities at my
> > university. Can you tell me how you installed E+ on Ubuntu 12.04? I can't
> > for the life of me get it to work. Thanks.
> >
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Miroslav Bratanov
> > <miroslav_bratanov@> wrote:
> > >
> > > Hello all,
> > > I get these warnings when I run a model containing HVACTemplate objects.
> > >
> > > Program Version,EnergyPlus, Linux, VERSION 7.1.0.012, YMD=2012.06.25
> > > 23:52,IDD_Version 7.1.0.012
> > > ** Warning ** Output:PreprocessorMessage="ExpandObjects" has the
> > > following Warning condition:
> > > ** ~~~ ** Cannot find Energy+.idd as specified in Energy+.ini.
> > > ** Warning ** Output:PreprocessorMessage="ExpandObjects" has the
> > > following Warning conditions:
> > > ** ~~~ ** Since the Energy+.IDD file cannot be read no range or
> > > choice checking was
> > > ** ~~~ ** performed.
> > >
> > > The warnings show only with the Linux version of EPlus. The program is
> > > installed with its defaults on Ubuntu 12.04. I even reinstalled it
> > > twice, but the warnings are still there.
> > > I tried the same model with the Windows version and everything went fine
> > > without any warnings.
> > >
> >
> >  
> >
> 
> 
> 
> -- 
> Edwin Lee
> Doctoral Candidate, Oklahoma State University
> ASHRAE Student Member, *Former* ASHRAE OSU Student Branch President
> Office: ATRC 303: 405-744-3727
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/