[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: ExpandObjects warnings EnergyPlus 7.1 Linux



Hello Miroslav and list,

I am getting the same errors using the OSX installation for 7.1.  It does not occur for version 7.0.  

Did you find a solution to this problem?

thanks

Dave

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Miroslav Bratanov <miroslav_bratanov@...> wrote:
>
> Hello all,
> I get these warnings when I run a model containing HVACTemplate objects.
> 
> Program Version,EnergyPlus, Linux, VERSION 7.1.0.012, YMD=2012.06.25 
> 23:52,IDD_Version 7.1.0.012
>     ** Warning ** Output:PreprocessorMessage="ExpandObjects" has the 
> following Warning condition:
>     **   ~~~   ** Cannot find Energy+.idd as specified in Energy+.ini.
>     ** Warning ** Output:PreprocessorMessage="ExpandObjects" has the 
> following Warning conditions:
>     **   ~~~   ** Since the Energy+.IDD file cannot be read no range or 
> choice checking was
>     **   ~~~   ** performed.
> 
> The warnings show only with the Linux version of EPlus. The program is 
> installed with its defaults on Ubuntu 12.04. I even reinstalled it 
> twice, but the warnings are still there.
> I tried the same model with the Windows version and everything went fine 
> without any warnings.
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/