[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Temperature Out of Bounds During Warmup
Haha, yes I was able to solve this particular error. I can't remember exactly what I did though but it was something really simple. I might have been using the E+ 7.0 weather file instead of the 7.1 weather file.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Vaibhav Jain <vaibhav.energyarchitect@...> wrote:
>
> Hello Matthew,
>
> Were you able to resolve the error? I too get the same, and I am now
> following Richard's instruction.
>
> Vaibhav
>
>
>
>
>
> On 31 July 2012 13:54, Richard Raustad <RRaustad@...> wrote:
>
> > **
> >
> >
> > It could be solar. Turn on reporting during warmup and add report
> > variables.
> >
> > This technique is used to diagnose all problems with a simulation.
> >
> > Use:
> > Output:Diagnostics,ReportDuringWarnup;
> > Output:VariableDictionary,IDF;
> >
> > Then run the simulation again. Look in the rdd file for report variables
> > that could help identify what is causing this.
> > Outdoor temp
> > Output:Variable,*,Outdoor Dry Bulb,hourly; !- Zone Average [C]
> >
> > Zone temp
> > Output:Variable,*,Zone Mean Air Temperature,hourly; !- Zone Average [C]
> > Output:Variable,*,Zone/Sys Air Temperature,hourly; !- HVAC Average [C]
> > Output:Variable,*,Zone/Sys Air Temperature at Thermostat,hourly; !- HV
> >
> > The zone load
> > Output:Variable,*,Zone/Sys Sensible Load Predicted,hourly; !- HVAC
> > Average [W]
> > Output:Variable,*,Zone/Sys Sensible Load to Heating Setpoint
> > Predicted,hourly; !- HVAC Average [W]
> > Output:Variable,*,Zone/Sys Sensible Load to Cooling Setpoint
> > Predicted,hourly;
> >
> > Solar through windows
> > Output:Variable,*,Beam Solar Transmitted through Interior Window,hourly;
> > !- Zone Average [W]
> >
> > There are many others....
> >
> > Then run the simulation again and look at the simulation output (*.csv)
> >
> >
> > On 7/30/2012 6:18 PM, ntraughpee wrote:
> > > I am having this error during the warmup of a new model I am trying to
> > create:
> > >
> > > ** Severe ** Temperature (high) out of bounds (245.03] for
> > zone="FIRSTNORTH", for surface="961E1D"
> > > ** ~~~ ** During Warmup, Environment=RUNPERIOD, at Simulation time=01/01
> > 03:00 - 03:03
> > > ** ~~~ ** Zone="FIRSTNORTH", Diagnostic Details:
> > > ** ~~~ ** ...Internal Heat Gain [0.000] W/m2
> > > ** ~~~ ** ...Infiltration/Ventilation [0.000] m3/s
> > > ** ~~~ ** ...Mixing/Cross Mixing [0.000] m3/s
> > > ** ~~~ ** ...Zone is part of HVAC controlled system.
> > > ** Fatal ** CalcHeatBalanceInsideSurf: Program terminates due to
> > preceding conditions.
> > > ...Summary of Errors that led to program termination:
> > > ..... Reference severe error count=1
> > > ..... Last severe error=Temperature (high) out of bounds (245.03] for
> > zone="FIRSTNORTH", for surface="961E1D"
> > >
> > > Any idea what is causing this? I have never encountered it before and I
> > am flumoxed.
> > >
> > >
> > >
> > > ------------------------------------
> >
> > >
> > > Primary EnergyPlus support is found at:
> > > http://energyplus.helpserve.com or send a message to
> > energyplus-support@...
> > >
> > > The primary EnergyPlus web site is found at:
> > > http://www.energyplus.gov
> > >
> > > The group web site is:
> > > http://groups.yahoo.com/group/EnergyPlus_Support/
> > >
> > > Attachments are currently allowed but be mindful that not everyone has a
> > high speed connection. Limit attachments to small files.
> > >
> > > EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the
> > Documentation link and press the "search" button.
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> > --
> > Richard A. Raustad
> > Senior Research Engineer
> > Florida Solar Energy Center
> > University of Central Florida
> > 1679 Clearlake Road
> > Cocoa, FL 32922-5703
> > Phone: (321) 638-1454
> > Fax: (321) 638-1439 or 1010
> > Visit our web site at: http://www.fsec.ucf.edu
> >
> > UCF - From Promise to Prominence: Celebrating 40 Years
> >
> >
> >
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/