There is no severe errors. I only ran the DesignDay sizing simulatin.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: direzionecontraria@xxxxxxxx
Date: Sat, 25 Aug 2012 17:38:06 +0000
Subject: [EnergyPlus_Support] Radiant system for cooling: set point not met
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
In Summer, the zones seems to be over cooled. Ground floor zt 19°C and 2nd floor 19° when no sun, and 26°C with solar heating.
In Winter, when there is no sun, the ground floor is at 17°C and 2nd floor 20°C.
Because the schedules are all mixed and with number as identifies, it is not easy to trace. I am assuming that 17. 19, 20, 26 are the four zone temperature set points. I have not found the relavent schedules yet.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: direzionecontraria@xxxxxxxx
Date: Sat, 25 Aug 2012 17:38:06 +0000
Subject: [EnergyPlus_Support] Radiant system for cooling: set point not met
I created a simple model having two zones. Originally I created it with DesignBuilder and then I made some modifications in EnergyPlus. I uploaed it in http://tech.groups.yahoo.com/group/EnergyPlus_Support/files/_Problem_Submittals/
and it is called test2zonesB.idf
In the lower zone I created a FCU, in the upper zone I created a floor having an internal source that is heated during winter and it is cooled during summer.
The setpoint is not met in the zone having a radiant system during the summer season.
Any suggestion, please?
With Regards
Francesco Passerini
and it is called test2zonesB.idf
In the lower zone I created a FCU, in the upper zone I created a floor having an internal source that is heated during winter and it is cooled during summer.
The setpoint is not met in the zone having a radiant system during the summer season.
Any suggestion, please?
With Regards
Francesco Passerini
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___