[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] jEPlus & Window-to-wall ratio



Why dont you try creating .inp files for the WWR and Interior Partitions and then call them up directly in the .imf file through JEPlus. If you would like to go through this process, I have an example that I can share with you. Ivan Korolija from jEplus was the person who helped me with it and I have been following this way ever since.

Basically you create .inp files using Notepad and call them up in your .imf file, instead of an idf file. I hope that makes sense. 

Can  I send you an email directly to your amirhosein_ghoreishi@xxxxxxxxx?

Niraj

On Wed, Aug 29, 2012 at 5:38 PM, Amir <amirhosein_ghoreishi@xxxxxxxxx> wrote:
 

Folks,

I have been trying to use jEPlus for a parametric study that includes wall, slab, window-to-wall ratio (WWR) and interior partitions as variables for 8 different locations. Unlike the first two, for WWR and partitions, I have not been able to get it to work and Jeremiah and other folks have been generously trying to help. I have come up with an idea and would be grateful if you think whether this a right approach to start with.

Instead of having one .idf file with different search strings representing all variables, I will have three .idf files for three WWR(s) and three .idf files for 3 different partition layouts, and then I will place the search strings for wall and slab variables in all 6 .idf files. At the end, I will choose all 6 files and all 8 locations all at once and run the jEPlus program. I know this would not give me all possible combinations among these variables but may work. What do you think?




--
Niraj Poudel, Architectural Engineer.
PhD student, PDBE Program.
Clemson University, Clemson, SC.




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___