i use this program because the other daylight analysis software s just use latitude and longitude of the city for analysis, but the energyplus uses weather data containing sky clearness and luminous efficacy of beam solar radiation ,for simulation.that i think it makes the analysis more accurate,is'nt it? in order to explain my problem i'd like to attach my file, but i don't know how --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jim Dirkes <jim@...> wrote: > > Dear Sh, > EnergyPlus is not a daylight analysis program. I do not recommend using it for that purpose. > (In addition, it is impossible to have even a general idea about your problem with the information you provided. Imagine that someone asked you the same question. How would you answer with only the fact that E+ indicates 1000lux 10m from the window? And no input information?) > > James V Dirkes II, PE, BEMP, LEED AP > www.buildingperformanceteam.com<http://www.buildingperformanceteam.com/> > Energy Analysis, Commissioning & Training Services > 1631 Acacia Drive, Grand Rapids, MI 49504 USA > 616 450 8653 > > From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of sh > Sent: Wednesday, September 12, 2012 2:22 AM > To: EnergyPlus_Support@xxxxxxxxxxxxxxx > Subject: [EnergyPlus_Support] daylighting > > > > hi every body.i am using energyplus for daylight analysis in a city in Iran,but the illumination results are is more than what it is expected,as it has shown the illumination of the points that are 10 meter far from the window 1000lux.do you know what is the problem? >