im the way you suggest (direct coupling) the entry water temp will be quite high/cool resulting in more extreme surface temps when extreme heating or cooling loads are present. This will artificially inflate the surface limited heattransfere capabillity of the system. Additionally, condensation cases for the cooling case will not be well represented.
Sent from my iPhone
Sent from my iPhone
Jean: How about ZoneHVAC:LowTemperatureRadiant:ConstantFlow for radiant floor with re-circulation? Water heaters can be coupled to plant loop.
Vaibhav Jain
On 24 September 2012 14:42, Jean marais <jeannieboef@xxxxxxxxx> wrote:This is the next level in eplus expertise...welcome to the club.
In my opinion, using the waterheater:mixed object as a plate-water-water heatexchanger is the easiest methode. The low-temp loop then is supplied by this tank.
The concept is that the tank is a user (demand side) on the boiler demandside loop, but at the same time a source (source side) for the low-temp loop.
Try get this to work with a simple 2 zone model, before expanding to the real building model.
Goodluck.
Jean Marais
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "FrancescoP" <direzionecontraria@...> wrote:
>
> I have posted an image from the design drawings of the plant that I'm modelling: http://imageshack.us/a/img585/41/hotwaterloop.jpg
> In the plat there are both water radiators and heated floors. The supply temperature of the heated floors is lower than the supply temperature of the water radiator, although the boiler is the same. In fact, the heated floors have a specific secondary loop with water recirculation. What is the best solution to model such a configuration?
> I start modelling in DesignBuilder and then I develop the model in EnergyPlus.
> With Regards
> Francesco Passerini
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___