Not that I’ve done anything substantial in EMS, but I recall that you can create custom variables and can also report them. Perhaps a custom variable could be created which mimics the cost by using the proper tariffs…
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of ntraughpee
Sent: Thursday, October 11, 2012 12:06 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Cost in Output:Meter or Output:Variable
Anybody think there is a workaround for this where you could create a custom meter or something a long those lines?
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ntraughpee" <matthew.sverre.anderson@...> wrote:
>
> Well E+ can output hourly consumption in energy and if I know the energy type consumed per hour I fig
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___