[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Humidifier and AirLoopHVAC:UnitaryHeatPump:AirToAir
Hello James,
I'm using Humidifier:Steam:Electric
Are there other possibilities? I'm using version 7.1
Is steam considered as having the same temperature of air? If it were considered as having a temperature of 100°C, from the point of view of air there would be also a sensible gain.
Best Regards
Francesco
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jim Dirkes <jim@...> wrote:
>
> Francesco,
> The location of a humidifier will not normally matter. Just put the humidifier downstream of the heating coil or in the zone.
> p.s., What type of humidifier are you modeling?
>
>
> James V Dirkes II, PE, BEMP, LEED AP
> www.buildingperformanceteam.com<http://www.buildingperformanceteam.com/>
> Energy Analysis, Commissioning & Training Services
> 1631 Acacia Drive, Grand Rapids, MI 49504 USA
> 616 450 8653
>
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of FrancescoP
> Sent: Tuesday, October 16, 2012 4:24 AM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Re: Humidifier and AirLoopHVAC:UnitaryHeatPump:AirToAir
>
>
>
> I'm modeling system 4 for the baseline model of ASHRAE 90.1-2007. In the proposed building there is a humidifier.
> If I cannot add the humidifier between the heating coil and the supplemental heating coil, in your opinion what is the best solution?
> Best Regards
> Francesco Passerini
>
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx<mailto:EnergyPlus_Support%40yahoogroups.com>, "FrancescoP" <direzionecontraria@<mailto:direzionecontraria@>> wrote:
> >
> > I have to add a humidifier between the heating coil and the supplemental heating coil of an air handling unit that I'm modelling as AirLoopHVAC:UnitaryHeatPump:AirToAir. Is it possible? Among the components of the branch there are no coils, but directly the AirLoopHVAC:UnitaryHeatPump:AirToAir object.
> >
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/